DRUM BARREL TOTE
Drum Pump: Pump tubes are designed with threaded joints for easy maintenance and individual component replacement without special tools. Our guide sleeves are PTFE, with a specially extruded fin which secures it inside the inner tube. We utilize a seal grade carbon for our lower bushing (pure carbon 6038C), the most chemically resistant carbon available. Our shafts are Hastelloy C-276 (PP, PPP, CK and KY models), or 316 stainless steel (SS models).
Series ‘DP’ Drum Pumps: Series ‘DP’ Drum Pumps combine modern manufacturing techniques with proven and reliable design features. They are a convenient and efficient means of transferring and dispensing most liquid chemicals from drums, carboys and tanks. These pumps are available in a selection of engineered plastics or polished 316 stainless steel thus providing a great range of chemical compatibility. The pumps are available in lengths to meet your requirements and all pumps can be used interchangeablywith any of our electric or air motors. They can be quickly changed to meet particular pumping or motor requirements. Simply insert the pump into the liquid for immediate pumping. No priming is necessary since the rotor is located at the bottom end of the pump. Flow may be controlled with the unique speed control knob on the ODP-S and ENC-S motors to prevent splashing and control the volume. Keep these handy pumps on location throughout your plant for convenient solution transfer.
Smart Drum Pump Batch Control System: SERFILCO Smart Pumps are engineered to control, measure and dispense any volume of liquid from drums, IBCs, tanks and any large storage vessel. They can be used in any industry where batching, chemical packaging or dilution is required to be accurate and efficient.
- Accuracy: within 0.5%. Meter employs “Teach In” calibration or preset “K factors” for various specific gravities. No more estimating or using floor scales to properly measure corrosive chemicals.
- Safety: operator does not come in contact with corrosive chemicals. No more drum tilting with fork lifts, measurement with buckets or pails. Control transfer of highly corrosive liquids from your storage container to a mixing tank or process line.
- Memory: Save up to 7 preset volumes in the Automatic Batch memory or change each batch in the Manual Batch setting.
- Efficient: system operates up to 25 GPM. Faster transfer and measurement of liquid increases productivity and lowers downtime.
- Quick connection: 1” hose barb or 1” NPT thread for ease in hose change or quick disconnect setup.
High Viscosity Drum Pumps: Serfilco Progressive Cavity pumps are engineered to transfer high viscosity materials from drums, tanks and IBC’s. Utilizing the principle of positive displacement, these pumps deliver a continuous flow with little product degradation. The series 700 (Industrial) and series 800 (Sanitary) pumps can transfer materials ranging in viscosity up to 100,000 cps/ mPas. All pumps are constructed from robust 316SS with a choice of stator elastomers.
Series 700 Industrial Pump: Serfilco series 700 Industrial Pumps are commonly used throughout the industrial marketplace for transferring viscous materials such as polymers, paints, resins, adhesives and petroleum based products.
Series 800 Sanitary Pump: Serfilco series 800 Sanitary Pumps are commonly used throughout the sanitary food processing, pharmaceutical, biotechnology, and cosmetic industries. Applications include the transfer of tomato paste, mayonnaise, pie fillings, salad dressing, shampoos, and cosmetic lotions. The series 800 pumps are manufactured according to standards with FDA approved materials of construction. The pumps utilize a threaded design and tri-clamp fittings for quick cleaning, inspection and maintenance.
Lab Pump: Pump tubes are designed with threaded joints for easy maintenance and individual component replacement without special tools. Our guide sleeves are PTFE, with a specially extruded fin which secures it inside the inner tube. We utilize a seal grade carbon for our lower bushing (pure carbon 6038C), the most chemically resistant carbon available. Our shafts are Hastelloy C-276 (PP, PPP, CK and KY models), or 316 stainless steel (SS models).
Series 'HP' Hand Dispensing Pumps: The Hand Dispensing Pump is a double acting piston type which will handle a wide range of solutions. The pump body, valves, valve seats and piston are all made of chemically resistant, performance engineered plastics, especially compounded to give the pump strength and rigidity. All internal metal parts in contact with the liquid are made of 316 stainless steel.
Designed for the transfer or dispensing of concentrates, additives or other liquids which are purchased in bulk but are used in small quantities. This low cost pump delivers one pint per stroke or one quart with the forward and back push/pull of the handle. The variety of materials of construction enables the user to select those which are specifically required for his individual needs according to chemical resistance charts. The use of this pump eliminates having to pour from one container to another and avoids costly and hazardous spilling and splashing.