Residential Products
4" Submersible Motors 1/2 to 1-1/2 HP
PENTEK submersible motors are unique in providing the industry with innovative and robust design features that will extend the life of your installation.
The PENTEK XE Series submersible motors utilize a 304L stainless steel “encapsulated, epoxy stator design,” and professional-grade Class F insulation provides longer life in harsh environments. Each motor is 100% factory pressure and run tested to support our quality standards.
Municipal Products
Vertical Turbine Solids-Handling Pumps VTSH® Series
VTSH© pumps can be found in sewage and raw water lift stations, many unattended, which require utmost reliability and freedom from clogging and resistance to wear or other downtime maintenance. Plants demand pumps to provide sustained high performance, the best possible design to resist clogging, minimize wear, and minimum size driving motors and controls to reduce construction and operation costs. Sewage and wastewater treatment plants and industrial plants where solids handling service, sludge mixing, sludge re-circulation, return sludge, activated sludge, jet aeration, trickling filter, filter backwash, and primary and secondary effluent is required are typical installations. Other installations include river intake, plant influent and storm water pumping.
Features
Parameters of Fairbanks Morse VTSH© pumps require the units to be available in configurations to meet user needs. Fairbanks Morse meets these demands by providing VTSH© pumps in 10", 16", 20", 24" and 30" nominal bowl diameters.
Impellers are of the non-clogging type designed with blunt, well-rounded leading vanes and thick hydrofoil shape to ensure passage of large solids and long stringy materials. VTSH© pumps are substantially more efficient over a broad capacity range than conventional solids-handling pumps. The diffuser bowl design is such that there is no bearing below the impeller to obstruct flow into the impeller eye or on which trash could collect. The bowl is designed with two symmetrically arranged well- rounded diffuser vanes which serve to fully balance the radial hydraulic forces and eliminate the radial load of the impeller. Consequently, bending forces imposed on the shaft are virtually eliminated, resulting in long bearing life and a smooth, quiet operation.
Material of construction includes cast iron bowls and impellers, and stainless steel pump shaft. Column is flanged and line shaft is enclosed for water flushing and lubrication of bearings. The column contains a vertical splitter plate aligned with the vertical exits of the bowl vane to prevent trash from accumulating on the shaft enclosing tube.
Industrial Products
2535S Triplex Plunger Pump
The Hypro 2535S triplex plunger pump is designed for durability, top performance, and convenient servicing. It achieves up to 38 gpm (144 lpm) and 1200 psi (83 bar). The 316 stainless steel two-piece manifold minimizes washout and corrosion. A strong power end including oversized crankshaft, bearings, and connecting rods easily handles abuse caused by start-up and intermittent operation.
Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
Performance Information
- Max. flow: 38 gpm/144 lpm
- Max. pressure: 1200 psi/83 bar
- Max. rated speed: 800 rpm
Other Attributes
- Ports: 1/2" inlet, 3/8" outlet
- Shaft: 3/4" OD solid thru shaft for left- or right-hand operation
- Head and manifold material: 316 stainless steel head and two-piece manifold resist washout and corrosion
- Oversized crankshaft, bearings and bronze connecting rod can handle the abuse of cold start-ups and intermittent operation
- Plunger rod: Stepped plunger rod between plunger guide and oil seal eliminates seal failure due to plunger rod wear
- V-packings: Self-adjusting, spring-loaded, double V-packings maintain constant high pressure seal compression and extend seal and plunger life
- Servicing: Innovative cartridge design allows for easy service access by bringing all of the maintenance toward the front
- Easily replaces Cat 3535 and General 1541 pumps
- Rails: Sold separately (Part # 1510-0110)
- Weight: 141 lbs./64.0 kg
Commercial products
Horizontal split case pumps are the most common type of Fire Pump. These pumps are specially tested for fire-service applications where reliability of performance is of vital importance. They are characterized by easy access to all working parts, rugged construction, liberal water passages, and efficient operation. They are specified when the source of water is located above the surface of the ground and will provide a positive suction pressure to the pump at any performance point.
Series 911 - Inline Fire Pumps
Features
- UL Listed/FM Approved/NFPA-20 Design
- Flows from 50 to 750 GPM
- Pressures from 40 to 205 PSI
- For Commercial, Residential and Industrial Use
- Space Saving Design
