Product Recovery / Pollution Control Equipment and Fluid Handling Equipment for the Industrial, Commercial, and Residential Markets
Duall Division
Met-Pro Corporation is headquartered in Harleysville, Pennsylvania, which is approximately 30 miles northwest of the city of Philadelphia. Through its divisions and subsidiaries, a wide range of products are manufactured for industrial, commercial, and residential markets. These products include Product Recovery / Pollution Control Equipment for purification of air and liquids, and Fluid Handling Equipment for corrosive, abrasive and high temperature liquids. The company's products are sold throughout the world. Met-Pro Corporation is a public company listed on the New York Stock Exchange which trades under the symbol "MPR". Duall Division Duall Division is one of the leading manufacturers of air and water quality control systems for the treatment of odors, corrosive fumes and toxic gas in industrial and municipal applications. Our major products include Hexmaster® and HepaHex dry scrubbers; MistMiser™, Mist-X® and Oilmaster™ mist eliminators; fume and emergency gas scrubbers; BetaNox® NOx scrubbers; Hydrolance™ wet particulate dust collectors; odor control wet scrubbers and AroBIOS™ bioscrubbers; aeration towers and degasifiers; and DUALLast™ FRP corrosion resistant ducting and exhaust fans. Mist Eliminators and Dry Scrubbers Hexmaster® High Efficiency Dry Scrubbers are corrosion resistant horizontal and vertical mist eliminators. They are recommended for applications involving removal of aerosol mist where minimum water usage is paramount. Oilmaster™ Oilmist Scrubbers are used for the removal of oil mist from industrial air streams. Air pollution caused by oil mist is such a problem at some plants that plant air is actually an oily haze. Duall‘s OilMaster™solves this problem by collecting soluble or insoluble oils such as synthetic, mineral, cutting or forging oils. In many cases, OilMaster™ removes oil from polluted air so effectively that the cleaned air can be returned directly to the plant. Costly B.T.U.’s are saved in cold months by reducing air make-up requirements. Expensive housekeeping, storm water run-off and fire hazard problems are eliminated as oil does not collect on the building structure or roof. Extracted oil may be filtered for reuse. Other products in this field include: MistMiser™ In-line Mist Eliminator Mist-X® Oil Mist Collector Fume and Gas Wet Scrubbers: F, FW and PT Fume Scrubbers Duall single and extended pack fume scrubbers solve most industrial air pollution problems. They are especially effective on water-soluble fumes and odors. The extended pack scrubber with chemical addition is used on many low-solubility contaminants. NOx Control Systems Beta NOx 2000™ Wet Scrubbers: Single and multiple stage high efficiency nitrogen oxide (NOx) control scrubbing systems Features include: Over 99% efficient on total NOx removal The safest oxidation/reduction technology Cost effective Corrosion resistant, eliminates the red NOx plume Low profile, space saving design available PTMD Packaged Low Profile Scrubbers Features include: Pre-engineered systems up to 25,000 CFM Single and multi-stage packaged design Complete with proportional chemical feed system Corrosion and UV-resistant thermoplastic and DUALLast™ FRP Low-profile, easy access Heavy-duty, industrial grade construction Odor Control Systems AroBios™ Bioscrubbers AroBios™ Bioscrubbers are 100% environmentally friendly and highly efficient in removing odors. The AroBIOS™ system employs state-of-the-art biotrickling filter technology. Together with a unique blend of micro-organisms, it has been tested and proven effective in removing odorous gases from wastewater treatment plants. Wet Scrubbers for Municipal and Industrial Odor Control Cost Effective FRP Dual Laminate and Thermoplastic Scrubbers Duall designs and manufactures customized odor control scrubbers and systems to meet customer specific needs. Through the use of a highly trained lab and chemical engineering staff, Duall can design a unit to meet even the strictest requirements. Major design criteria evaluated include: size of unit, packings, moisture extractor, scrubbing liquid, recycle rate and material of construction. PTMD Packaged Low Profile Scrubbers Pre-engineered systems up to 25,000 CFM Single and multi-stage packaged design Complete with proportional chemical feed system Corrosion and UV-resistant thermoplastic and DUALLast™ FRP Low-profile, easy access Heavy-duty, industrial grade construction Aerators and Degasifiers Efficient and cost effective answers to VOC removal, degasification and odor elimination. Features include: Removes most VOC’s, ammonia, and dissolved sulfides Capacities from 5 gpm to 3,000 gpm in single column applications NSF-61 certified construction Options for exhaust air purification: AroBIOS bioscrubbers, carbon adsorbers, and chemical scrubbers Optional features include self-cleaning and automatic monitoring for safer unattended operation Wet Dust Collectors Duall's Wet Dust Collectors and Particulate Control Systems offer: Low energy use Pre-engineered designs (custom designs available upon request) Pilot testing available Complete ventilation systems available Replaceable Venturi throat Available with CIP cleaning options High efficiency — >99% on very fine particulate Higher efficiency designs available upon request Corrosion resistant Ducts, Hoods, Fittings and Accessories Fume Ventilation and Air Pollution Control Systems Duall manufactures corrosion-resistant fume ventilation and air pollution control systems including ducts, hoods, fittings, and accessories to standard specifications or will custom design them to ensure optimum performance for your specific application. Duall offers you more services than any other supplier; including on-site testing, pilot and lab studies, system design, spec writing, equipment installation and start-up. Over the years, Duall has provided equipment and services that ensure unequaled quality and performance. Corrosion Resistant Thermoplastic and Fiberglass Exhaust Fans Duall offers a wide selection of corrosion-resistant centrifugal exhaust fans to handle even the most difficult applications. Standard materials of construction are polyvinyl chloride (PVC), polypropylene (PP), and fiberglass reinforced plastic (FRP). Optional materials of construction are poly vinylidene fluoride (PVDF) and stainless steel. To visit our Duall Division website click here.
Met-Pro Corporation is headquartered in Harleysville, Pennsylvania, which is approximately 30 miles northwest of the city of Philadelphia. Through its divisions and subsidiaries, a wide range of products are manufactured for industrial, commercial, and residential markets. These products include Product Recovery / Pollution Control Equipment for purification of air and liquids, and Fluid Handling Equipment for corrosive, abrasive and high temperature liquids. The company's products are sold throughout the world. Met-Pro Corporation is a public company listed on the New York Stock Exchange which trades under the symbol "MPR".
Duall Division is one of the leading manufacturers of air and water quality control systems for the treatment of odors, corrosive fumes and toxic gas in industrial and municipal applications.
Our major products include Hexmaster® and HepaHex dry scrubbers; MistMiser™, Mist-X® and Oilmaster™ mist eliminators; fume and emergency gas scrubbers; BetaNox® NOx scrubbers; Hydrolance™ wet particulate dust collectors; odor control wet scrubbers and AroBIOS™ bioscrubbers; aeration towers and degasifiers; and DUALLast™ FRP corrosion resistant ducting and exhaust fans.
Mist Eliminators and Dry Scrubbers
Hexmaster® High Efficiency Dry Scrubbers are corrosion resistant horizontal and vertical mist eliminators. They are recommended for applications involving removal of aerosol mist where minimum water usage is paramount.
Oilmaster™ Oilmist Scrubbers are used for the removal of oil mist from industrial air streams.
Air pollution caused by oil mist is such a problem at some plants that plant air is actually an oily haze. Duall‘s OilMaster™solves this problem by collecting soluble or insoluble oils such as synthetic, mineral, cutting or forging oils.
In many cases, OilMaster™ removes oil from polluted air so effectively that the cleaned air can be returned directly to the plant. Costly B.T.U.’s are saved in cold months by reducing air make-up requirements. Expensive housekeeping, storm water run-off and fire hazard problems are eliminated as oil does not collect on the building structure or roof. Extracted oil may be filtered for reuse.
Other products in this field include:
Fume and Gas Wet Scrubbers: F, FW and PT Fume Scrubbers
Duall single and extended pack fume scrubbers solve most industrial air pollution problems. They are especially effective on water-soluble fumes and odors. The extended pack scrubber with chemical addition is used on many low-solubility contaminants.
NOx Control Systems
Beta NOx 2000™ Wet Scrubbers: Single and multiple stage high efficiency nitrogen oxide (NOx) control scrubbing systems
Features include:
PTMD Packaged Low Profile Scrubbers
Odor Control Systems
AroBios™ Bioscrubbers
AroBios™ Bioscrubbers are 100% environmentally friendly and highly efficient in removing odors. The AroBIOS™ system employs state-of-the-art biotrickling filter technology. Together with a unique blend of micro-organisms, it has been tested and proven effective in removing odorous gases from wastewater treatment plants.
Wet Scrubbers for Municipal and Industrial Odor Control
Cost Effective FRP Dual Laminate and Thermoplastic Scrubbers
Duall designs and manufactures customized odor control scrubbers and systems to meet customer specific needs. Through the use of a highly trained lab and chemical engineering staff, Duall can design a unit to meet even the strictest requirements. Major design criteria evaluated include: size of unit, packings, moisture extractor, scrubbing liquid, recycle rate and material of construction.
Aerators and Degasifiers
Efficient and cost effective answers to VOC removal, degasification and odor elimination.
Wet Dust Collectors
Duall's Wet Dust Collectors and Particulate Control Systems offer:
Ducts, Hoods, Fittings and Accessories
Fume Ventilation and Air Pollution Control Systems
Duall manufactures corrosion-resistant fume ventilation and air pollution control systems including ducts, hoods, fittings, and accessories to standard specifications or will custom design them to ensure optimum performance for your specific application. Duall offers you more services than any other supplier; including on-site testing, pilot and lab studies, system design, spec writing, equipment installation and start-up. Over the years, Duall has provided equipment and services that ensure unequaled quality and performance.
Corrosion Resistant Thermoplastic and Fiberglass Exhaust Fans
Duall offers a wide selection of corrosion-resistant centrifugal exhaust fans to handle even the most difficult applications. Standard materials of construction are polyvinyl chloride (PVC), polypropylene (PP), and fiberglass reinforced plastic (FRP). Optional materials of construction are poly vinylidene fluoride (PVDF) and stainless steel.
To visit our Duall Division website click here.
Dean Pump Division
Dean Pump Division is recognized worldwide for high quality pumps that handle a broad range of industrial and chemical process applications. We are an industry leader in providing pumps for handling high temperature liquids in a variety of hot oil and hot water applications. Our major product lines include: magnetic drive air-cooled high temperature pumps; magnetic drive ANSI chemical pumps; heavy duty high temperature process pumps; air-cooled high temperature pumps; horizontal, vertical, and self-priming ANSI pumps; and heavy duty industrial inline pumps. ANSI Design Chemical Process Pumps pH Series Horizontal ANSI Design Process Pumps The pH Series chemical process pumps are built to ANSI/ASME B73.1 dimensions. Twenty-two sizes are available in ductile iron, 316SS, CD4MCu and Alloy 20 construction. Additional higher metal alloys (Hastelloy B or C, titanium, etc.) are available upon request. pHP Series Self-Priming Chemical Process Pumps The pHP Series Pumps feature excellent priming times, maximum interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet (6.1 m). Five sizes are available in ductile iron or 316SS construction. pHV Series Vertical Sump Pumps The pHV Series Vertical Sump Pumps are adaptable for vented or vapor sealed sump cover designs or outside tank mounted service. Features include the ability to handle sump depths up to 18 feet (5.5m). Eleven sizes are available in ductile iron and 316SS construction. M300 Series Magnetic Drive ANSI Design Chemical Process Pumps The M300 Series Pumps are seal less, chemical process pumps built to ANSI/ASME B73.1 dimensions. Features include discharge-to-discharge circulation, silicon carbide bearings, Samarium cobalt rare earth magnets and a Hastelloy-C containment shell. Twelve sizes are available in ductile iron or 316SS construction. Other materials of construction are available upon request. Vertical Inline Pumps DeanLine Series Industrial Inline Pumps DeanLine Series Industrial Inline Pumps are excellent for process plant pump applications for capacities and heads less than ANSI AA and AB sizes. Standard features include an open impeller with integral seal and an electric driven motor. An optional air driven motor is also available. Two pump sizes are available in cast iron and 316SS construction. DL Series High Temperature Inline Pumps The DL Series vertical inline, close-coupled, pumps are excellent for high temperature chemical process applications. Features include a space saving design and fully open impellers. Seven sizes are available in ductile iron and 316SS construction. CNV Series Inline Process Pumps The CNV Series Pumps are vertical inline, close-coupled, chemical process pumps. Standard features include an open drip-proof, JMV frame close-coupled motor (extended shaft) for fast availability, a space saving design, and a fully open impeller. Available in ductile iron and 316 SS construction. High Temperature / Heat Transfer Pumps R400/4000 Series Heavy Duty, High Temperature Process Pumps The R400/4000 Series Pumps are the single most applied pump for high temperature heat transfer service. These heavy duty, centerline supported, chemical, petrochemical, and refinery style process pumps are available in twenty-seven sizes in steel and 316SS construction. RM5000 Series Magnetic Drive Heavy Duty Process Pumps RM5000 Series Pumps are seal less, heavy duty, chemical, petrochemical, and refinery style magnetic drive process pumps. Features include centerline mounted casing, enclosed impeller, discharge-to-discharge recirculation, silicon carbide bearings, Samarium cobalt magnets, and a Hastelloy C containment shell. Seventeen sizes are available in steel and 316SS construction. RA2000/3000 Series Air Cooled High Temperature Thermal Liquid Pumps The RA2000/3000 Series Pumps are cost effective, hot oil, heat transfer pumps. Pumps feature an air fan-cooled design with NO WATER COOLING REQUIRED! Eleven sizes are available in steel construction. RWA Series Air Cooled High Temperature Hot Water Pumps The RWA Series Pumps are heavy duty, high temperature pumps designed for use with hot water, ethylene glycol and propylene glycol in boiler feed, steam condensate, HVAC and other heat transfer applications. Pumps are a horizontal end-suction, centerline supported (yoke mount), back pullout design to permit ease of maintenance. In addition, pumps include a shaft mounted fan to provide airflow over the cooling fins of the pump. This air-cooled design translates to NO EXTERNAL WATER COOLING REQUIRED for the bearings and mechanical seal. Eight sizes are available in ductile iron construction. RMA5000 Series Magnetic Drive Air Cooled High Temperature Process Pumps The RMA5000 Series Pumps are seal less, air-cooled (or water-cooled), heavy duty process pumps. Features include centerline supported casing, silicon carbide bearings positively held against rotation, Samarium cobalt magnets and a Hastelloy C containment shell. Air fin cooling reduces heat flow from process fluid to magnets. Seventeen sizes are available in steel or 316SS construction. High Temperature/ Heavy Duty Process Pumps R5000 Series Heavy Duty API-Type Pumps The R5000 Series Pumps are chemical, petrochemical, and refinery style process pumps built to API 610, Fifth Edition, specifications. Features include heavy duty centerline support, plus a large taper bore seal cavity or jacketed cylindrical stuffing box. Twenty-seven sizes are available in steel and 316SS construction. To visit our Dean Pump Division website click here.
Dean Pump Division is recognized worldwide for high quality pumps that handle a broad range of industrial and chemical process applications. We are an industry leader in providing pumps for handling high temperature liquids in a variety of hot oil and hot water applications. Our major product lines include: magnetic drive air-cooled high temperature pumps; magnetic drive ANSI chemical pumps; heavy duty high temperature process pumps; air-cooled high temperature pumps; horizontal, vertical, and self-priming ANSI pumps; and heavy duty industrial inline pumps.
pH Series Horizontal ANSI Design Process Pumps
The pH Series chemical process pumps are built to ANSI/ASME B73.1 dimensions. Twenty-two sizes are available in ductile iron, 316SS, CD4MCu and Alloy 20 construction. Additional higher metal alloys (Hastelloy B or C, titanium, etc.) are available upon request.
pHP Series Self-Priming Chemical Process Pumps
The pHP Series Pumps feature excellent priming times, maximum interchangeability with the pH Series (ANSI) chemical process pumps, and suction lifts up to 20 feet (6.1 m). Five sizes are available in ductile iron or 316SS construction.
pHV Series Vertical Sump Pumps
The pHV Series Vertical Sump Pumps are adaptable for vented or vapor sealed sump cover designs or outside tank mounted service. Features include the ability to handle sump depths up to 18 feet (5.5m). Eleven sizes are available in ductile iron and 316SS construction.
M300 Series Magnetic Drive ANSI Design Chemical Process Pumps
The M300 Series Pumps are seal less, chemical process pumps built to ANSI/ASME B73.1 dimensions. Features include discharge-to-discharge circulation, silicon carbide bearings, Samarium cobalt rare earth magnets and a Hastelloy-C containment shell. Twelve sizes are available in ductile iron or 316SS construction. Other materials of construction are available upon request.
DeanLine Series Industrial Inline Pumps
DeanLine Series Industrial Inline Pumps are excellent for process plant pump applications for capacities and heads less than ANSI AA and AB sizes. Standard features include an open impeller with integral seal and an electric driven motor. An optional air driven motor is also available. Two pump sizes are available in cast iron and 316SS construction.
DL Series High Temperature Inline Pumps
The DL Series vertical inline, close-coupled, pumps are excellent for high temperature chemical process applications. Features include a space saving design and fully open impellers. Seven sizes are available in ductile iron and 316SS construction.
CNV Series Inline Process Pumps
The CNV Series Pumps are vertical inline, close-coupled, chemical process pumps. Standard features include an open drip-proof, JMV frame close-coupled motor (extended shaft) for fast availability, a space saving design, and a fully open impeller. Available in ductile iron and 316 SS construction.
R400/4000 Series Heavy Duty, High Temperature Process Pumps
The R400/4000 Series Pumps are the single most applied pump for high temperature heat transfer service. These heavy duty, centerline supported, chemical, petrochemical, and refinery style process pumps are available in twenty-seven sizes in steel and 316SS construction.
RM5000 Series Magnetic Drive Heavy Duty Process Pumps
RM5000 Series Pumps are seal less, heavy duty, chemical, petrochemical, and refinery style magnetic drive process pumps. Features include centerline mounted casing, enclosed impeller, discharge-to-discharge recirculation, silicon carbide bearings, Samarium cobalt magnets, and a Hastelloy C containment shell. Seventeen sizes are available in steel and 316SS construction.
RA2000/3000 Series Air Cooled High Temperature Thermal Liquid Pumps
The RA2000/3000 Series Pumps are cost effective, hot oil, heat transfer pumps. Pumps feature an air fan-cooled design with NO WATER COOLING REQUIRED! Eleven sizes are available in steel construction.
RWA Series Air Cooled High Temperature Hot Water Pumps
The RWA Series Pumps are heavy duty, high temperature pumps designed for use with hot water, ethylene glycol and propylene glycol in boiler feed, steam condensate, HVAC and other heat transfer applications. Pumps are a horizontal end-suction, centerline supported (yoke mount), back pullout design to permit ease of maintenance. In addition, pumps include a shaft mounted fan to provide airflow over the cooling fins of the pump. This air-cooled design translates to NO EXTERNAL WATER COOLING REQUIRED for the bearings and mechanical seal. Eight sizes are available in ductile iron construction.
RMA5000 Series Magnetic Drive Air Cooled High Temperature Process Pumps
The RMA5000 Series Pumps are seal less, air-cooled (or water-cooled), heavy duty process pumps. Features include centerline supported casing, silicon carbide bearings positively held against rotation, Samarium cobalt magnets and a Hastelloy C containment shell. Air fin cooling reduces heat flow from process fluid to magnets. Seventeen sizes are available in steel or 316SS construction.
R5000 Series Heavy Duty API-Type Pumps
The R5000 Series Pumps are chemical, petrochemical, and refinery style process pumps built to API 610, Fifth Edition, specifications. Features include heavy duty centerline support, plus a large taper bore seal cavity or jacketed cylindrical stuffing box. Twenty-seven sizes are available in steel and 316SS construction.
To visit our Dean Pump Division website click here.
Fybroc Division
Fybroc Division is the world leader in the design and manufacture of fiberglass reinforced pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications including pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids. Horizontal Fiberglass Pumps Series 1500 Horizontal ANSI Pumps ANSI standard fiberglass horizontal pump features high strength casings with integral flanges. Available in twenty sizes with capacities to 5000 GPM and heads to 400 feet. Features include: Capacities to 5000 GPM Heads to 400 feet ANSI B73.1 standard pump High strength casing Integral flange Twenty standard sizes Series 1530 Horizontal Close Coupled Pumps The space and weight savings of a close coupled pump are combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes with capacities to 1500 GPM and heads to 400 feet. Features include: Capacities to1500 GPM Heads to 400 feet High strength casing Integral flange Sixteen standard sizes Series 2858 ISO Standard Horizontal Pumps ISO standard pumps featuring high strength casings with integral flanges are available in five sizes with capacities to 325 GPM and heads to 340 feet. Features include: Capacities to 325 GPM Heads to 340 feet ISO 2858 standard pump High strength casing Integral flange Five standard sizes Series 3000 Recessed Impeller Horizontal Pumps Recessed impeller pumps featuring high strength casings with integral flanges are available in six sizes with capacities to 2300 GPM and heads to 130 feet. Features include: Capacities to 2300 GPM Heads to 130 feet Recessed impeller design Six standard sizes Magnetic Drive Pumps Series 2530 Magnetic Drive Close Coupled Pumps Magnetic drive pump features silicon carbide shaft and sleeve bearing (optional carbon sleeve bearing available). Available in eight sizes with capacities to 650 GPM and heads to 400 feet. Features include: Capacities to 650 GPM (150 m3/hr) Heads to 400 feet (125 m) Powers to 40 HP (30 kw) Temperatures to 200°F (93°C) Working Pressures to 200 PSI (1,380 kPa) ASME/ANSI B73.1 dimensioned Materials of construction availability: VR-1, VR-1 BPO-DMA, EY-2 Eight standard sizes Series 2630 Self-Priming Magnetic Drive Close Coupled Pumps The Fybroc Series 2630 is an FRP, close-coupled, self-priming, magnetic-drive seal less pump that incorporates many of the features found on the Fybroc Series 2530 pumps. With the exception of the casing volute/tank assembly, all components of the Series 2630 are fully interchangeable with those of the Series 2530. The Series 2630 is ideally suited for corrosive sump applications, tank car unloading, and other similar, demanding applications. The volute casing has been designed with optimal proportions in the recirculation chamber to provide for short and efficient priming times, without the use of troublesome check valves. The volute casing inlet has also been designed to minimize NPSH requirements, thereby leading to greater allowable suction lifts. An important feature of the Series 2630 is its replaceable volute extension. The casing volute cutwater in any self-priming pump must be in close proximity to the impeller in order to permit efficient priming. The removable volute extension in the Series 2630 is available in a number of sizes to match specific impeller diameters permitting field hydraulic changes and the restoration of priming efficiency, all without casing modifications or replacement. Features include: Capacities to 300 GPM (70 m3/hr) Heads to 200 feet (65 m) Suction Lifts to 20 feet (6 m) Two pump sizes Self-Priming Pumps Series 1600 Self-Priming Centrifugal Pumps These self-primers combine efficiency with excellent priming times. Substantial parts interchangeability with series 1500 pumps. Available in six sizes with capacities to 1400 GPM and heads to 300 feet. Features include: Capacities to 1400 GPM Heads to 300 feet Integral priming chamber high strength casing Integral flanges Six standard sizes Series 1630 Close Coupled Self-Priming Centrifugal Pumps The benefits of the close coupled pump are integrated with the features of the series 1600 pump. Six sizes with capacities to 1400 GPM and heads to 300 feet. Features include: Capacities to1400 GPM Heads to 300 feet Integral priming chamber Integral flanges Six standard sizes Vertical Pumps Series 5500 Vertical Fiberglass Sump Pumps Sump pumps are furnished in lengths (settings) from 18 inches to thirty feet with optional tailpipes. Eighteen sizes with capacities to 5000 GPM and heads to 275 feet. Features include: Capacities to 5000 GPM (1140 m3/hr) Heads to 275 feet (85 m) Pump lengths to 30 feet (9.1 m) Eighteen standard sizes Custom built to match customer pit/sump requirements Series 5530 Vertical Dry Pit Sump Pumps Offers space and weight savings combined with the ruggedness of a standard Series 5500 pump. Sixteen sizes with capacities to 1100 GPM and heads to 375 feet. Features include: Capacities to1100 GPM Heads to 375 feet Dry pit design Wrapped shaft standard Sixteen standard sizes Cantilever Pumps Series 7500 Cantilever Sump Pumps These pumps, with optional recessed impeller design, are available in lengths (settings) from 18 inches to four feet with optional tailpipes. Eighteen sizes with capacities to 4500 GPM and heads to 200 feet. Features include: Capacities to 4500 GPM Heads to 200 feet Optional wrapped shaft design High strength shafts Eighteen standard sizes To visit our Fybroc Division website click here.
Fybroc Division is the world leader in the design and manufacture of fiberglass reinforced pumps. These pumps are available in different materials to provide excellent corrosion resistance for tough applications including pumping of acids, brines, caustics, bleaches, solvents, seawater and a wide range of waste liquids.
Series 1500 Horizontal ANSI Pumps
ANSI standard fiberglass horizontal pump features high strength casings with integral flanges. Available in twenty sizes with capacities to 5000 GPM and heads to 400 feet.
Series 1530 Horizontal Close Coupled Pumps
The space and weight savings of a close coupled pump are combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes with capacities to 1500 GPM and heads to 400 feet.
Series 2858 ISO Standard Horizontal Pumps
ISO standard pumps featuring high strength casings with integral flanges are available in five sizes with capacities to 325 GPM and heads to 340 feet.
Series 3000 Recessed Impeller Horizontal Pumps
Recessed impeller pumps featuring high strength casings with integral flanges are available in six sizes with capacities to 2300 GPM and heads to 130 feet.
Series 2530 Magnetic Drive Close Coupled Pumps
Magnetic drive pump features silicon carbide shaft and sleeve bearing (optional carbon sleeve bearing available). Available in eight sizes with capacities to 650 GPM and heads to 400 feet.
Series 2630 Self-Priming Magnetic Drive Close Coupled Pumps
The Fybroc Series 2630 is an FRP, close-coupled, self-priming, magnetic-drive seal less pump that incorporates many of the features found on the Fybroc Series 2530 pumps. With the exception of the casing volute/tank assembly, all components of the Series 2630 are fully interchangeable with those of the Series 2530. The Series 2630 is ideally suited for corrosive sump applications, tank car unloading, and other similar, demanding applications. The volute casing has been designed with optimal proportions in the recirculation chamber to provide for short and efficient priming times, without the use of troublesome check valves. The volute casing inlet has also been designed to minimize NPSH requirements, thereby leading to greater allowable suction lifts.
An important feature of the Series 2630 is its replaceable volute extension. The casing volute cutwater in any self-priming pump must be in close proximity to the impeller in order to permit efficient priming. The removable volute extension in the Series 2630 is available in a number of sizes to match specific impeller diameters permitting field hydraulic changes and the restoration of priming efficiency, all without casing modifications or replacement.
Series 1600 Self-Priming Centrifugal Pumps
These self-primers combine efficiency with excellent priming times. Substantial parts interchangeability with series 1500 pumps. Available in six sizes with capacities to 1400 GPM and heads to 300 feet.
Series 1630 Close Coupled Self-Priming Centrifugal Pumps
The benefits of the close coupled pump are integrated with the features of the series 1600 pump. Six sizes with capacities to 1400 GPM and heads to 300 feet.
Series 5500 Vertical Fiberglass Sump Pumps
Sump pumps are furnished in lengths (settings) from 18 inches to thirty feet with optional tailpipes. Eighteen sizes with capacities to 5000 GPM and heads to 275 feet.
Series 5530 Vertical Dry Pit Sump Pumps
Offers space and weight savings combined with the ruggedness of a standard Series 5500 pump. Sixteen sizes with capacities to 1100 GPM and heads to 375 feet.
Series 7500 Cantilever Sump Pumps
These pumps, with optional recessed impeller design, are available in lengths (settings) from 18 inches to four feet with optional tailpipes. Eighteen sizes with capacities to 4500 GPM and heads to 200 feet.
To visit our Fybroc Division website click here.
Keystone Filter Division
Keystone Filter manufactures a wide range of air, liquid, and gas filtration products for industrial, commercial and residential markets. These industrial filter products include industrial liquid and home drinking water filters, filter housings and replacement filter cartridges. Filter cartridges are available in a wide range of media including polypropylene, microfiberglass, cellulose and activated carbon. Standard, giant and bag housings are offered in a variety of materials including blue polypro, clear SAN, reinforced nylon and stainless steel. Keystone Filter is also one of the premier custom pleaters and custom filter cartridge manufacturers in the United States. Standard Industrial Filter Cartridges Polypropylene Filters with Polypro End Caps These replacement filter cartridges feature the latest technology in filter media. Layers of melt-blown and spun-bonded polypropylenes combine to produce nominal retentions from 0.1 micron to 30 micron. Polypropylene filters feature popular end cap styles which fit most standard and sanitary style housings. Ideal as low cost membrane prefilters, these high efficiency filter cartridges serve a wide range of applications. Polypropylene Filters with PVC End Caps These polypropylene replacement filter cartridges feature the same high quality filter media as the all polypropylene series filters combined with self-gasketing FDA grade PVC endcaps. Typical applications for these economical filter cartridges include food and beverage, water purification, bottled water and cosmetics. Microfiberglass Filters with Polypro End Caps These filter cartridges are designed to provide the most economical solution for a wide range of filtration problems. State of the art microfiberglass is layered with spun bonded polyester to produce highly efficient particulate removal with extremely low pressure drops. The pleated construction allows greater surface area than depth type cartridges which translates directly into longer life. Microfiberglass Filters with PVC End Caps These filter cartridges are designed to provide the most economical solution for a wide range of filtration problems. State of the art microfiberglass filters are layered with spun bonded polyester to produce highly efficient particulate removal with extremely low pressure drops. The pleated construction allows greater surface area than depth type cartridges which translates directly into longer life. Giant Industrial Filter Cartridges and Bags Polypropylene Filters with PVC End Caps These polypropylene filter cartridges feature high quality polypropylene filter media combined with self-gasketing FDA grade PVC endcaps. Typical applications for these economical filter cartridges include food and beverage, water purification, bottled water and cosmetics. High Performance Cellulose Filter Cartridges with PVC End Caps Pleated phenolic impregnated cellulose cartridges for industrial applications. Features include: High flow rate, high dirt holding capacity and low pressure drop create optimal system operation Cellulose media supported by polypropylene components Three removal ratings Pleated configuration Compatible with a wide range of industrial fluids Polyester Filter Cartridges with PVC End Caps Pleated phenolic impregnated polyester cartridges for industrial applications. Features include: High flow rate, high dirt holding capacity and low pressure drop create optimal system operation Polyester media supported by polypropylene components Two removal ratings Pleated configuration Compatible with a wide range of industrial fluids Economy Cellulose Filter Cartridges with PVC End Caps These low cost, high quality filter cartridges feature tough, resin impregnated cellulose that is pleated to provide high dirt holding capability. Self-gasketing PVC end caps and polypropylene support components are featured in these economical cartridges that are suited to a wide range of industrial process fluid applications. Wound or Carbon Briquette Filter Cartridges Two different designs offer a choice in carbon filtration. The three micron nominal convolutely wound cartridge features more finely divided carbon secured in a fibrous matrix for greater adsorptive efficiency at a low cost. The ten micron granular carbon cartridge features over eight ounces of highly activated carbon providing longer life and high efficiency in the removal of unpleasant tastes and odors and chemical contaminants. Activated Carbon Block Filter Cartridges Carbon block filter cartridges provide extended life while removing sediment, chlorine, taste, odor, and organic contaminants from water, aqueous solutions or suspensions and many organic solvents. Blue Giant Series Blue Giant carbon block filter cartridges flow in the radial (outside-to-inside) direction, providing increased flow at lower pressure drop than conventional granular activated carbon (g.a.c.) filters. These cartridges will not channel or bypass due to the extreme uniformity of their extruded carbon core and can be installed without prefiltration because of their high dirt holding capacity. Giant Polypropylene and Polyester Bag Filters Keystone’s exclusive line of bag filters for our Giant housings have a unique seal ring that ensures the most efficient means of bag filtration. All bags are 100% polypropylene or polyester with plastisol (PVC) seal ring and are available in micron ratings from 1 to 200. Polyester bags are recommended for hot water/high pressure applications. Keystone bags are available in the compact 10" length – very adaptable to side stream testing applications – and the more versatile 20" double length. Other bags may also be used in our housings. Giant Economy Polypropylene and Polyester Bag Filters Keystone also offers giant economy bag filters with a conventional metal ring seal. These bags are a low cost alternative to our standard bags and are suitable for applications where PVC (Plastisol) seals cannot be used and/or where a conventional steel ring provides a sufficient seal for your process. To visit our Keystone Filter Division website click here.
Keystone Filter manufactures a wide range of air, liquid, and gas filtration products for industrial, commercial and residential markets. These industrial filter products include industrial liquid and home drinking water filters, filter housings and replacement filter cartridges. Filter cartridges are available in a wide range of media including polypropylene, microfiberglass, cellulose and activated carbon. Standard, giant and bag housings are offered in a variety of materials including blue polypro, clear SAN, reinforced nylon and stainless steel. Keystone Filter is also one of the premier custom pleaters and custom filter cartridge manufacturers in the United States.
Polypropylene Filters with Polypro End Caps
These replacement filter cartridges feature the latest technology in filter media. Layers of melt-blown and spun-bonded polypropylenes combine to produce nominal retentions from 0.1 micron to 30 micron. Polypropylene filters feature popular end cap styles which fit most standard and sanitary style housings. Ideal as low cost membrane prefilters, these high efficiency filter cartridges serve a wide range of applications.
Polypropylene Filters with PVC End Caps
These polypropylene replacement filter cartridges feature the same high quality filter media as the all polypropylene series filters combined with self-gasketing FDA grade PVC endcaps. Typical applications for these economical filter cartridges include food and beverage, water purification, bottled water and cosmetics.
Microfiberglass Filters with Polypro End Caps
These filter cartridges are designed to provide the most economical solution for a wide range of filtration problems. State of the art microfiberglass is layered with spun bonded polyester to produce highly efficient particulate removal with extremely low pressure drops. The pleated construction allows greater surface area than depth type cartridges which translates directly into longer life.
Microfiberglass Filters with PVC End Caps
These filter cartridges are designed to provide the most economical solution for a wide range of filtration problems. State of the art microfiberglass filters are layered with spun bonded polyester to produce highly efficient particulate removal with extremely low pressure drops. The pleated construction allows greater surface area than depth type cartridges which translates directly into longer life.
These polypropylene filter cartridges feature high quality polypropylene filter media combined with self-gasketing FDA grade PVC endcaps. Typical applications for these economical filter cartridges include food and beverage, water purification, bottled water and cosmetics.
High Performance Cellulose Filter Cartridges with PVC End Caps
Pleated phenolic impregnated cellulose cartridges for industrial applications.
Polyester Filter Cartridges with PVC End Caps
Pleated phenolic impregnated polyester cartridges for industrial applications.
Economy Cellulose Filter Cartridges with PVC End Caps
These low cost, high quality filter cartridges feature tough, resin impregnated cellulose that is pleated to provide high dirt holding capability. Self-gasketing PVC end caps and polypropylene support components are featured in these economical cartridges that are suited to a wide range of industrial process fluid applications.
Wound or Carbon Briquette Filter Cartridges
Two different designs offer a choice in carbon filtration. The three micron nominal convolutely wound cartridge features more finely divided carbon secured in a fibrous matrix for greater adsorptive efficiency at a low cost. The ten micron granular carbon cartridge features over eight ounces of highly activated carbon providing longer life and high efficiency in the removal of unpleasant tastes and odors and chemical contaminants.
Activated Carbon Block Filter Cartridges
Carbon block filter cartridges provide extended life while removing sediment, chlorine, taste, odor, and organic contaminants from water, aqueous solutions or suspensions and many organic solvents.
Blue Giant Series
Blue Giant carbon block filter cartridges flow in the radial (outside-to-inside) direction, providing increased flow at lower pressure drop than conventional granular activated carbon (g.a.c.) filters. These cartridges will not channel or bypass due to the extreme uniformity of their extruded carbon core and can be installed without prefiltration because of their high dirt holding capacity.
Giant Polypropylene and Polyester Bag Filters
Keystone’s exclusive line of bag filters for our Giant housings have a unique seal ring that ensures the most efficient means of bag filtration. All bags are 100% polypropylene or polyester with plastisol (PVC) seal ring and are available in micron ratings from 1 to 200. Polyester bags are recommended for hot water/high pressure applications.
Keystone bags are available in the compact 10" length – very adaptable to side stream testing applications – and the more versatile 20" double length. Other bags may also be used in our housings.
Giant Economy Polypropylene and Polyester Bag Filters
Keystone also offers giant economy bag filters with a conventional metal ring seal. These bags are a low cost alternative to our standard bags and are suitable for applications where PVC (Plastisol) seals cannot be used and/or where a conventional steel ring provides a sufficient seal for your process.
To visit our Keystone Filter Division website click here.
Keystone Filter Division Contd…
Standard Filter Housings Blue Talc Reinforced Polypro or Clear San Filter Housings Standard filter housings offer the following: White talc reinforced polypropylene head with blue talc reinforced or clear styrene acrylonitrile (SAN) bowl Standard 3/4" NPT connections Securely retained Buna “N” O-Ring to ensure effective sealing by positive tangential contact; eliminates accidental misplacement; provides longer life Positive head to bowl “stop” to prevent bowl overtightening Available from stock with or without pressure relief vent button Custom colors available by special order Mounting bosses in head for available bracket Accepts industry standard cartridge size: - 23/4" O.D. x 1" I.D. x 93/4" (full length), - 47/8" (half size) and 20" (double length). Full testing to industry standards of the Water Quality Association for burst pressure, water tightness and fatigue resistance All Polypropylene Filter Housings Keystone’s pure polypropylene filter housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants. In critical applications, these all natural housings insure pure, cost effective filtration of a variety of solvents, acids, alcohols and chemicals without leaching or bacterial build up. Keystone 100% polypropylene housings provide an inexpensive alternative to teflon or fluoropolymer housings. Reinforced Nylon Filter Housings These filter housings are suitable for high temperature and high pressure service. Stainless Steel Filter Housings Keystone’s versatile and rugged stainless steel filter housings are useful for a broad range of applications. Features include: Cast bronze nickel-plated heads with nickel-plated “T” handle cap nut. Shell is a unibody style made of 304 stainless steel “T” handle top nut and petcock bottom drain eliminate the need for tools when changing cartridges Machined groove in underside of head retains Buna “N” gaskets for positive sealing 3/4" NPT connections are standard. 1" NPT is also available Giant Filter Housings Giant Blue Talc Reinforced or Clear San Filter Housings Keystone Filter has taken a GIANT step in the development of a high capacity, high flow filter. These housings are available in a wide selection of materials including Keystone’s EXCLUSIVE CLEAR styrene models. Giant All Polypropylene Filter Housings Keystone’s GIANT all polypropylene filter housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants. In critical applications, these all natural housings insure pure, cost effective filtration of a variety of solvents, acids, alcohols and chemicals without leaching or bacterial build up. Keystone 100% polypropylene housings provide an inexpensive alternative to teflon or fluoropolymer housings. GIANT Reinforced Nylon Filter Housings Keystone GIANT reinforced nylon cartridge housings are suitable for hot water/high pressure service. These units offer a lightweight alternative to costly metallic vessels. Giant Bag Filter Housings Giant Blue Talc Reinforced Polypropylene and Clear San Bag Filter Housings Giant bag housings offer the following unique features: Available with Keystone’s EXCLUSIVE 10" and 20" clear styrene acrylonitrile (SAN) bowl or our 10" and 20" blue talc reinforced polypropylene bowl. Both 1-1/2" and 1" NPT connections are included in every GIANT filter head. (Also available with British pipe threads) Mounting bosses in head for available bracket Talc unit comes complete with pressure gauge, basket support, polypropylene drain plugs, wrench and ball valve to drain sump Clear unit comes complete with pressure gauge, basket support, polypropylene plugs and wrench. Drain is not provided with clear bowls (CGB10, CGB20). Do not tap drain in clear bowl Giant All Polypropylene Bag Filter Housings Keystone’s GIANT all polypropylene bag housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants. Giant Reinforced Nylon Bag Housings Keystone GIANT reinforced nylon bag housings are suitable for hot water/high pressure service. These units offer a lightweight alternative to costly metallic bag vessels. Home Drinking Water Filter Housings and Cartridges Dirt/Rust and Sediment Filters Taste and Odor Removal Filters Taste/Odor/Chemical Removal and Lead/Cyst Reduction Filters Dirt Hog™ Cleanable/Reusable Sediment Filters Standard Filter Housings (w/o Cartridges) Giant Filter Housings For more information on home drinking water filter housings and cartridges click here.
Blue Talc Reinforced Polypro or Clear San Filter Housings
Standard filter housings offer the following:
All Polypropylene Filter Housings
Keystone’s pure polypropylene filter housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants.
In critical applications, these all natural housings insure pure, cost effective filtration of a variety of solvents, acids, alcohols and chemicals without leaching or bacterial build up. Keystone 100% polypropylene housings provide an inexpensive alternative to teflon or fluoropolymer housings.
Reinforced Nylon Filter Housings
These filter housings are suitable for high temperature and high pressure service.
Stainless Steel Filter Housings
Keystone’s versatile and rugged stainless steel filter housings are useful for a broad range of applications.
Giant Blue Talc Reinforced or Clear San Filter Housings
Keystone Filter has taken a GIANT step in the development of a high capacity, high flow filter. These housings are available in a wide selection of materials including Keystone’s EXCLUSIVE CLEAR styrene models.
Giant All Polypropylene Filter Housings
Keystone’s GIANT all polypropylene filter housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants.
GIANT Reinforced Nylon Filter Housings
Keystone GIANT reinforced nylon cartridge housings are suitable for hot water/high pressure service. These units offer a lightweight alternative to costly metallic vessels.
Giant Blue Talc Reinforced Polypropylene and Clear San Bag Filter Housings
Giant bag housings offer the following unique features:
Giant All Polypropylene Bag Filter Housings
Keystone’s GIANT all polypropylene bag housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of virgin polypropylene without color, adders, fillers, reinforcements or lubricants.
Giant Reinforced Nylon Bag Housings
Keystone GIANT reinforced nylon bag housings are suitable for hot water/high pressure service. These units offer a lightweight alternative to costly metallic bag vessels.
For more information on home drinking water filter housings and cartridges click here.
Sethco Division and Pristine Water Solutions
Sethco Division Sethco is a leading manufacturer of corrosion resistant pumps and filtration systems for pumping, transferring and filtering a wide range of industrial corrosive liquids. Our products include drum pumps, magnetic drive pumps, vertical and horizontal centrifugal pumps, sump pumps, cartridge and bag filter chambers, in-tank/out-of-tank filtering systems, carbon purification/filtration chambers and systems, and custom filter systems plus replacement filter bags, cartridges and media. Direct Drive Seal-Less Drum Pumps Drum Pumps are used for the safe and fast transfer of chemicals, solvents, corrosive liquids in hazardous or non-hazardous environments. Magnetic Drive Seal-less Pumps Self Priming Magnetic Drive Seal-less Centrifugal Pumps End Suction Magnetic Drive Seal-less Centrifugal Pumps These pumps are designed for corrosive liquid and chemical transfer. Magnetic drive, seal-less design for leak proof, trouble-free operation Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids Powerful magnets drive the pump to deliver up to 225 GPM/105 FT. TDH Stainless steel exterior hardware Handles temperatures to 220°F (99 C) Corrosion resistant, fan cooled motors Twin impeller design for high volume circulation and leak proof operation High strength molded pump body for vibration free operation and extended pump life Easy maintenance Ideal for OEM applications Corrosion Resistant Vertical Pumps CPVC/PVDF Bearing-Free Seal-Less Vertical Pumps Designed for Corrosive Liquid Pumping Features include: Bearing-free, seal-less design for leak proof, trouble-free operation Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids Powerful magnets drive the pump to deliver up to 19.46 GPM/34 FT. TDH (7.35 LPM/10.5M TD) Stainless steel exterior hardware Handles temperatures to 210°F (99 C) Corrosion resistant, fan cooled motors Twin impeller design for high volume circulation and leak proof operation Portable for easy transfer between working areas Easy maintenance Convenient mounting panel for easy mounting to tank Ideal for OEM applications Bearing Free, Seal-less 316 Stainless Steel Vertical Pumps Designed for Corrosive Liquid Applications The “ZSX series” stainless steel vertical pumps are completely corrosion resistant and are recommended for transferring, recirculating and agitating a wide range of chemical, laboratory and industrial process applications. Like our popular “ZDX” series, these stainless steel models incorporate a unique opposing twin-impeller design. The design feature provides high volume circulation and eliminates leakage up the pump column. No bearings or seals permit dry running without damage. Stainless Steel Horizontal Pumps Sethco compact stainless steel horizontal centrifugal pumps are ideally suited to a wide range of chemical, laboratory and processing applications. Precision built, they offer excellent resistance to corrosive liquids. Sump Pumps Sethco sump pumps are used for corrosive services; chemical processing, waste treatment, acids and alkalies, chromic acid wastes, salt water, and fume scrubbers. Bag Filter Chambers Designed for removing trace contaminants down to 1 micron. Ideally suited for filtering and corrosive solutions including electroless copper and nickel to 200° F. In-Tank Suction Filter Systems Designed to pump, filter, agitate and treat corrosive solutions used in metal finishing shops, laboratories and other chemical processes. These pump systems are used for corrosive liquid filtration. Out-of-Tank Bag Filter Systems These systems are designed for corrosive liquid filtration. Bag Filter Systems Complete systems include a pump and motor, chamber, filter bag, inlet and discharge hoses and all accessories required to set up and operate the system. All systems (except with ZDX Series pumps) are mounted on a corrosion resistant rigid plastic panel on rubber tire /ball bearing casters or rubber feet, depending on model. DBG-1/2, 1 and 1 ½ chambers sold with a Model ZDX pump come with a adjustable polypropylene mounting panel. Chamber models 2, 3 and 5 are provided with a coated steel base unless customer requests tank flange mount. Carbon Treatment Filtration Systems Carbon treatment filtration systems are designed to carbon treat and filter bright nickel, acid copper, tin and zinc, ferrous chloride, copper pyrophosphate, cyanide copper, zinc, cadmium and silver, lead-tin fluoborate and most other plating solutions. String Wound Cartridge Filters Large selection of stock sizes, materials, cores, and densities Economically priced - quantity discounts available Wide selection of depth filter tubes to fit all your filtration and purification needs. High quality materials and special winding techniques provide longer depth filtration cycles. Precision winding pattern covers the entire depth of the filter tubes with hundreds of funnel shaped tunnels which become gradually finer from the outer surface to the center of the tube and trap progressively finer particles as the fluids travel to the center. Damaging particles from 1 to 150 microns are effectively eliminated. Pleated Cartridge Filters Extended Filtration Surface. Sixty deepfold pleats multiply the available filtration surface area. This construction offers greater contaminant holding capacity compared to the cylinder-type tube. Other advantages of the Sethco Pleated Filter Cartridge are high strength, polypropylene construction, resistance to deterioration, inertness to tough liquids such as corrosive electroplating and sensitive photo and processing solutions. Reusable and long lasting under the toughest liquid conditions make it ideally suited to all industrial and laboratory filtration applications. To visit our Sethco Division website click here. Pristine Water Solutions Pristine water solutions provide proprietary chemicals for the treatment of municipal drinking water systems and boiler and cooling tower systems. These products reduce iron, manganese, lead and copper levels in potable water systems, as well as reducing corrosion, scaling and microbiological levels in all water systems. Products for improving water clarity while reducing sludge volume and trihalomethane levels within a water system are also available. Major markets include: Public water treatment Scale control Corrosion control Red and black water control Lead and copper control Iron and manganese sequestration To visit our Pristine Water Solutions website click here.
Sethco is a leading manufacturer of corrosion resistant pumps and filtration systems for pumping, transferring and filtering a wide range of industrial corrosive liquids. Our products include drum pumps, magnetic drive pumps, vertical and horizontal centrifugal pumps, sump pumps, cartridge and bag filter chambers, in-tank/out-of-tank filtering systems, carbon purification/filtration chambers and systems, and custom filter systems plus replacement filter bags, cartridges and media.
Direct Drive Seal-Less Drum Pumps
Drum Pumps are used for the safe and fast transfer of chemicals, solvents, corrosive liquids in hazardous or non-hazardous environments.
Magnetic Drive Seal-less Pumps
These pumps are designed for corrosive liquid and chemical transfer.
Corrosion Resistant Vertical Pumps
CPVC/PVDF Bearing-Free Seal-Less Vertical Pumps Designed for Corrosive Liquid Pumping
Bearing Free, Seal-less 316 Stainless Steel Vertical Pumps Designed for Corrosive Liquid Applications
The “ZSX series” stainless steel vertical pumps are completely corrosion resistant and are recommended for transferring, recirculating and agitating a wide range of chemical, laboratory and industrial process applications. Like our popular “ZDX” series, these stainless steel models incorporate a unique opposing twin-impeller design. The design feature provides high volume circulation and eliminates leakage up the pump column. No bearings or seals permit dry running without damage.
Stainless Steel Horizontal Pumps
Sethco compact stainless steel horizontal centrifugal pumps are ideally suited to a wide range of chemical, laboratory and processing applications. Precision built, they offer excellent resistance to corrosive liquids.
Sump Pumps
Sethco sump pumps are used for corrosive services; chemical processing, waste treatment, acids and alkalies, chromic acid wastes, salt water, and fume scrubbers.
Bag Filter Chambers
Designed for removing trace contaminants down to 1 micron. Ideally suited for filtering and corrosive solutions including electroless copper and nickel to 200° F.
In-Tank Suction Filter Systems
Designed to pump, filter, agitate and treat corrosive solutions used in metal finishing shops, laboratories and other chemical processes. These pump systems are used for corrosive liquid filtration.
Out-of-Tank Bag Filter Systems
These systems are designed for corrosive liquid filtration.
Bag Filter Systems
Complete systems include a pump and motor, chamber, filter bag, inlet and discharge hoses and all accessories required to set up and operate the system. All systems (except with ZDX Series pumps) are mounted on a corrosion resistant rigid plastic panel on rubber tire /ball bearing casters or rubber feet, depending on model. DBG-1/2, 1 and 1 ½ chambers sold with a Model ZDX pump come with a adjustable polypropylene mounting panel. Chamber models 2, 3 and 5 are provided with a coated steel base unless customer requests tank flange mount.
Carbon Treatment Filtration Systems
Carbon treatment filtration systems are designed to carbon treat and filter bright nickel, acid copper, tin and zinc, ferrous chloride, copper pyrophosphate, cyanide copper, zinc, cadmium and silver, lead-tin fluoborate and most other plating solutions.
String Wound Cartridge Filters
Wide selection of depth filter tubes to fit all your filtration and purification needs. High quality materials and special winding techniques provide longer depth filtration cycles. Precision winding pattern covers the entire depth of the filter tubes with hundreds of funnel shaped tunnels which become gradually finer from the outer surface to the center of the tube and trap progressively finer particles as the fluids travel to the center. Damaging particles from 1 to 150 microns are effectively eliminated.
Pleated Cartridge Filters
Extended Filtration Surface. Sixty deepfold pleats multiply the available filtration surface area. This construction offers greater contaminant holding capacity compared to the cylinder-type tube. Other advantages of the Sethco Pleated Filter Cartridge are high strength, polypropylene construction, resistance to deterioration, inertness to tough liquids such as corrosive electroplating and sensitive photo and processing solutions. Reusable and long lasting under the toughest liquid conditions make it ideally suited to all industrial and laboratory filtration applications.
To visit our Sethco Division website click here.
Pristine water solutions provide proprietary chemicals for the treatment of municipal drinking water systems and boiler and cooling tower systems. These products reduce iron, manganese, lead and copper levels in potable water systems, as well as reducing corrosion, scaling and microbiological levels in all water systems. Products for improving water clarity while reducing sludge volume and trihalomethane levels within a water system are also available.
Major markets include:
To visit our Pristine Water Solutions website click here.
:: IDS Emergency Management :: IDS Packaging ::IDS Publishing / Media::IDS Healthcare Management::IDS Environment::IDS Plastics::IDS Power/Energy::
Industry IDS, Inc. – Online Tradeshow, Exhibition, & Buyers Guide Solutions
