Gulf Atlantic Pump & Dredge, LLC manufactures diesel hydraulic power units to each of our customer's needs. Each power unit is specifically engineered and designed for the pumps required by the specific customer; additional options can be placed on the power unit with minimal effort. Power Units are skid or trailer mounted maintaining a fuel cell for 24 hour operation. Hydraulic systems are engineered to meet and or exceed hydraulic motor requirements on each submersible pump manufactured. All hoses and fitting on our power units are manufactured by Parker Hannifin which allows customers to find replacement parts throughout the world. Systems controls are supplied by FW Murphy or LOFA.
Power Units Line
30HP Power Units
- Overall length: 6”0”” (3.51 m)
- Overall width: 6’-0” (1.83 m)
- Height: 5’-8” (1.73 m)
- Fuel capacity: 85 gallons (423.96 l)
- Wet weight: 2,000 lb. (1 ¼ tons)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, without damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue can easily be removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
50 HP Power Units
- Overall length: 8”0”” (3.51 m)
- Overall width: 6’-0” (1.83 m)
- Height: 5’-8” (1.73 m)
- Fuel capacity: 85 gallons (423.96 l)
- Wet weight: 2,500 lb. (1 ¼ tons)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, without damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue are easily removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
85 HP Power Units
- Overall length: 11’-6” (3.51 m)
- Fuel capacity: 112 gallons (423.96 l)
- Overall width: 6’-0” (1.83 m)
- Wet weight: 3,100 lb.(1 1/2 tons)
- Height: 5’-8” (1.73 m)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, without damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue can easily be removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
100HP Power Units
- Overall length: 11’-6” (3.51 m)
- Overall width: 6’-0” (1.83 m)
- Height: 5’-8” (1.73 m)
- Fuel capacity: 112 gallons (423.96 l)
- Wet weight: 3,100 lb. (1 1/2 tons)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, with out damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue can easily be removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
150HP Power Units
- Overall length: 12’-5” (3.78 m)
- Overall width: 6’-0” (1.83 m)
- Height: 5’-8” (1.73 m)
- Fuel capacity: 121 gallons (498.03 l)
- Wet weight: 3,500 lb.(1 3/4 tons)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, without damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue are easily removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
177HP Power Units
- Overall length: 12’-5” (3.78 m)
- Overall width: 6’-0” (1.83 m)
- Height: 5’-8” (1.73 m)
- Fuel capacity: 110 gallons (498.03 l)
- Wet weight: 4,500 lb. (1.25 tons)
Hydraulic System
Suction strainer, return filters, relief valves, low oil shutdown, and temperature shutdown protect the hydraulic system. All units are equipped to allow any and all modifications or repairs with minimal oil loss.
Features
All units have bottom mounted fuel tank, which provides a lower center of gravity for more stability and larger fuel capacities. The submersible pumps or tooling being used can run dry, stall, or jam, without damaging the power unit. System requires no other power source allowing operation in remote areas. The axle, fenders, and tongue are easily removed to produce a skid mounted unit. Single point lifting bail allows easy mobilization for skid or trailer mounted units.
GAPD Offers the Following Options for all Power Units Manufactured
- Multiple Hydraulic Pump Configurations
- Trailer Package, DOT Approved Using Torsion Axels
- Electric Picker Crane
- Hydraulic Picker Crane
- Equipment Basket
- Hose Rack
- Hose Reel
- Slurry Gate Pump Circuit
- Additional 3/4" Hydraulic Circuit
- Additional 1" Hydraulic Circuit
- Additional 1 4" Hydraulic Circuit
- Additional 2" Hydraulic Circuit
- HI/LO range Selector Valve
