ALTERNATORS
KGA
Rating
- 2 to 40 kVA in 1 Phase and 3 Phase
Specifications
- Brush and Brushless type
- ‘F’ Class Insulation
- Speed 1500 rpm
- S1 Duty
- Ambient 40°C
- 240V/ 415V, ± 5% voltage regulation, 0.8PF
Altitude
- 1000 m above mean sea level
KBM
Rating
- 2 to 40 kVA in 1 Phase and 3 Phase
Specifications
- Brush and Brushless type
- ‘F’ Class Insulation
- Speed 1500 rpm
- S1 Duty
- Ambient 40°C
- 230V / 415V, ± 10% voltage regulation
- Unit Power Factor
Altitude
- 1000 m above mean sea level
KSA
Rating
- 2 to 40 kVA in 1 Phase and 3 Phase
Specifications
- Brush and Brushless type
- ‘F’ Class Insulation
- Speed 1500 rpm
- S1 Duty
- Ambient 40°C
Altitude
- 1000 m above mean sea level
VALVES
Butterfly Valves
Range
- Size 50 to 2500 mm
- Pressure up to PN 16
- Conforming to BS : 5155
- Pressure up to Class 250
- Conforming to AWWA C 504
- Higher pressures on request
Features
- Available in Centric design up to 600 mm
- Single, double eccentric design from sizes 65 mm to 2500 mm
- Less wear and tear
- Self-cleaning and non-jamming seat design
- Low operating torque
- Rigid and sturdy design
Applications
- Power plants
- Water supply and sewage
- Chemical and petrochemical plants
- Water works
- Water / Effluent / Sewage
- Treatment plants
Integral Seat (Ringless) Sluice Valves
Range
- Size 50 to 1300 mm
- Pressure PN 1.0 and PN 1.6
- Conforming to IS : 14846
- Rating PN 16 Conforming to BS 5163
Features
- Rigid and sturdy design
- Low pressure loss
- Available in Non Rising as well as in Rising Spindle Type
Swing Check Type Non Return Multi Door Reflux Valves
Range
- Size 600 to 1200
- Pressure up to PN 1.6
- Conforming to IS : 5312 (Part-1)
Features
- Rigid and sturdy design
- Swing check type with minimum head loss
- Long service life
Applications
- Clear Water up to 45 C
- Water works
- Water / Effluent / Sewage treatment plants
Cast Steel Globe Valve
Range
- Conforming to BS 1873
- Class 150# sizes 2" to 14"
- Class 300# sizes 2" to 8"
- Class 600# sizes 2" to 6”
Features
- Rigid and Sturdy Design
- Low pressure loss
- Long service life
Applications
- Naptha and naptha derivatives
- Liquids having corrosive properties
- Oil, refineries and process industries
TURBINES
Francis Turbines
Range
- Horizontal or Vertical
- Unit Output upto 10 MW
- Head upto 300 m
Features
- Optimized selection and sizing for high efficiency
- Delivered with high-quality self-lubricating bearings as standard which have higher specifications and are environment-friendly
- Supplied in two configurations
- Turbine runner and flywheel are directly mounted on generator shaft
- Turbine and Generator have their own separate shafts and bearings
Applications
- Small Hydro-electric projects: Dam based, run-off river etc
- Pumped storage
Kaplan
Range
- Horizontal or Vertical
- Unit Output upto 10 MW
- Head upto 60 m
Features
- Low head and high flow
- Supplied in following configurations
- Full Kaplan
- Semi Kaplan
- Propeller
- S Type tubular Kaplan (horizontal shaft)
Applications
- Small Hydro-electric projects: Dam based, run-off river etc.
- Canal based project
Capability
Designing, engineering, manufacturing, packaging, erectioning and commissioning, testing, training and upgrading
Pelton
Range
- Horizontal or Vertical
- Unit Output upto 10 MW
- Head upto 350 m
Features
- High head and low discharge
- Supplied in following configurations
- Single jet horizontal
- Double jet horizontal
- Four jet vertical
- Control mechanism with nozzle and deflector
Applications
- Small Hydro-electric projects with high head
Capability
- Designing, engineering, manufacturing, packaging, erectioning and commissioning, testing, training and upgrading
