Honeywell offers a full range of water control products which are appreciated by customers around the world due to their ease-of-installation and maintenance, their reliability and accuracy - thereby finally reducing installation and maintenance cost.
From technology for water, heating and cooling equipment to integrated systems for residential, commercial and industrial applications we provide technical solutions which meet the very highest quality, technology and reliability requirements. All Honeywell products are of coordinated design and are therefore in perfect harmony when combined together.
Pressure reducing valves protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurization damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
Standard Pattern Pressure Reducing Valve - D03
Media: Water
Body material: brass
Spring bonnet material: brass
Body finishing: nickel plated
Max. media temperature: 70oC
Static pressure: PN10
Flow capacity Kvs: 1.73
Pressure setpoint range: 1.5 ... 6 bar
Balanced seat design: yes
Standard Pattern Pressure Reducing Valve with Setpoint Scale - D06F
Approvals: DVGW, Up to size 1 1/4`` approved for low noise, Group 1 without limitations
Media: Water, compressed air and nitrogen
Body material: brass, dezincification resistant
Spring bonnet material: synthetic material
Port connection type: external threads
Static pressure: PN25
Integral filter: 0.16 mm
Pressure setpoint range: 1.5 ... 6 bar
Setpoint scale: yes
Balanced seat design: yes
High Pressure Pattern Pressure Reducing Valve- D06FH
Media: Water, compressed air and nitrogen
Body material: brass, dezincification resistant
Spring bonnet material: synthetic material
Port connection type: external threads
Max. media temperature: 70 oC
Static pressure: PN25
Integral filter: 0.16 mm
Pressure setpoint range: 1.5 ... 12 bar
Transparent strainer chamber: no
Balanced seat design: yes
Low Pressure Pattern Pressure Reducing Valve- D06FN
Media: Water, compressed air and nitrogen
Body material: brass, dezincification resistant
Spring bonnet material: synthetic material
Port connection type: external threads
Max. media temperature: 70oC
Static pressure: PN25
Integral filter: 0.16 mm
Pressure setpoint range: 0.5 ... 2 bar
Balanced seat design: yes
Standard Pattern Pressure Reducing Valve for Compressed Air- D22
Pressure reducing valves of this type protect installations against excessive pressure from the supply. They can be used for industrial or commercial applications within the range of their specification. Because pressure reducing valves are subject to wear, they cannot be used as the only means of protection and if the downstream system needs to be protected against excessive pressure to prevent leakage, then a suitable safety valve must be fitted.
Approvals: Certified to Pressure Equipment Directive 97/23/EC, Reference No. CE 0035
Media: Compressed air, non-toxic and non-flammable gases
Body material: brass
Spring bonnet material: synthetic material
Port connection type: internal threads
Max. media temperature: 70oC
Static pressure: PN40
Pressure setpoint range: 1 ... 10 bar
Balanced seat design: yes
Pressure Reducing Valves with Flanges
Honeywell pressure reducing valves with flanges protect installations against excessive pressure from the supply. They can be used for multi dwelling buildings, industrial or commercial applications within the range of their specification. These pressure reducing valves are available with flanged connections. The housing of almost every product is powder coated inside and outside, the used powder is physiologically and toxically safe.
Pressure Reducing Valve with Flanged Connections for Liquids and Gasses- D-SX100
The pressure reducer D-SX100 is a diaphragm-controlled, spring-loaded proportional controller with release for high flow rates of unperilous media. All parts consist of CrNiMo-steel with smooth surfaces. The valve cone is built as soft seal. Body and spring module with spring cap, spring, set screw, diaphragm and internal parts are only combined by the profile clamp and 2 screws. To replace the diaphragm ore the complete spring module for another pressure range is easy and possible without special tools. That applies also for maintenance.
Media: Liquids and gases up to 130 oC
Body material: stainless steel
Port connection type: flanges
Static pressure: PN16
Pressure setpoint range: 2 ... 5 bar
Balanced seat design: yes
Low Pressure Pattern Pressure Reducing Valve with Flanged Connections- D15NP
Media: Water, oil-free compressed air and nitrogen
Body material: cast iron GG25
Spring bonnet material: metal
Body finishing: powder coating
Port connection type: flanges
Max. media temperature: 70oC
Static pressure: PN16
Pressure setpoint range: 0.2 ... 2 bar
Balanced seat design: yes
Pressure Reducing Valve with Threaded Connections for Steam, Liquids and Gasses - D-SX100
The pressure reducer D-SX100 is a diaphragm-controlled, spring-loaded proportional controller with release. All parts consist of CrNiMo-steel with smooth surfaces. The valve cone is build as soft seal. Body and spring module with spring cap, spring, set screw, diaphragm and internal parts are only combined by the profile clamp and 2 screws. To replace the diaphragm or the complete spring module for another pressure range is easy and possible without special tools. That applies also for maintenance. The outlet pressure balances the force of the valve spring across the diaphragm (set value). As the outlet pressure rises above the pressure set using the set screw, the valve cone moves toward the seat causing the flow to be restricted. As the outlet pressure drops the restricting orifice becomes larger. The valve is fully open if the pipeline is depressurized. Rotating the setting screw clockwise increases the outlet pressure.
