Honeywell control valves fulfil the highest demands for regulation, material quality and durability. For installation in residential homes, buildings or in the industry our control products offer an optimal solution for a wide range of applications, for example pressure regulation, flow rate limitation, vessel filling, pump protection or overflow and safety functions.
Industrial Control Valves
Basic Valve - BV300
The basic valves are used as shutoff valves. They may be controlled by the common medium or by an external medium using the integral control valve. A manual, electro-magnetic solenoid or float valve can be used as the control valve. Their compact construction makes them ideally suited for applications where space is limited, for example in ducts. They can be used for commercial or industrial applications within the scope of their specification.
Pressure Sustaining Valve - DH300
DH300 pressure sustaining valves are regulators which control the pressure on the inlet side. They are used wherever a specific inlet pressure must not be exceeded, for example limiting the pressure in the inlet supply network or in transition links between supply networks and high demand large users. Their compact construction makes them ideally suited for applications where space is limited, for example in ducts. They can be used for commercial or industrial applications within the scope of their specification.
Attitude Control Valve - FD300
The FD300 attitude control valve controls the water level in, for example, water reservoirs without the need for using a float valve or other ancillary controls. The highly sensitive pilot valve and the main valve are installed outside the water reservoir and the pilot valve senses the hydrostatic water pressure from the water level in the reservoir. The main valve closes when the maximum set pressure for the pilot valve is reached and reopens when the water level corresponds to the lower set value on the pilot valve. The standard version permits filling of a water storage unit. A special version is also available on request which can be used for both filling and emptying water storage units.
Filling Valve - FV300
The FV300 filling valve can be used in water supplies and for industrial and commercial applications for the filling of reservoirs, tanks and cisterns. It is controlled by the main storage medium via a float valve and impulse link pipework. The FV300 filling valve is prevented from filling constantly by the use of a pilot valve, which can be adjusted to provide varying fill level differentials for opening and closing the valve.
Magnetic Solenoid Valve - MV300
Type MV300 magnetic solenoid valves are mainly used as shutoff valves. They are controlled by the integral magnetic solenoid operated valve. Their compact design makes them ideally suited where space is limited, for example in ducts. Within the scope of their specification they can be used on industrial and commercial applications.
Pump Control Valve - PS300
The PS300 valve is used as a protection valve in pressure boosting systems to provide a water hammer free shutdown and start-up of pumps.
Protection Valve for Deep Well Pumping - TC300
The protection valve for deep well pumping is used to permit pressure shock free starting and stopping of deep well pumps.
Float Valve for Water Storage Tanks - VR 170
VR 170 float valves regulate a fluid level in vented open or closed storage vessels or can be used for filling of water supply storage tanks. Within the scope of their specification they can be used for industrial or commercial installations or also for public water supply systems. A soft seat seal provides positive shutoff, even with fluctuating supply pressure.
Standard Pattern Overflow Valve - VU594P
The VU594P overflow valve controls the pressure on the inlet side. It is used wherever a specific inlet pressure must not be exceeded. If additional impulse link pipework is connected between the inlet and outlet sides the regulator can be used as an overflow valve to control differential pressure.
Universal Control Valves
Alwa-Kombi-4 (V1800) Circulation Throttle Valve
Features
- Throttle and shut-off valve for potable water circulation loops for balancing according to DVGW worksheets W551 and W552
- Retrofittable automatic temperature control with support of thermal disinfection
- Draining support with adapter (accessory)
- Valve housing without side connections for easy insulation
- Cavity-free insert with maintenance-free spindle sealing
- Handwheel thread isolated from the flow
- Visible digital pre-setting dial with concealed pre-setting ring
- Very precise due to factory calibration
- For potable water circulation systems
Alwa-KFR (V4120) Shutoff Valve with Integrated Backflow Preventer
The Alwa-KFR is used as shut-off valve with backflow preventer in potable water installations. The downstream installation is isolated by shutting off the valve with the handwheel. The integral backflow preventer with an opening pressure of <=10 mbar stops water from flowing back through the valve. The valve insert with integrated backflow preventer is available as spare part and fits into all valve housings with dimensions according to DVGW so that normal shut-off valves can be upgraded to shut-off valves with backflow preventer. Alwa-KFR valves are available with various pipe connections. Alwa-K-KFR valves are equipped with larger external threads specially suitable for pipe connections of various plastic pipes. Valves with draining facility allow draining of the system over the valve.
