Plastic Diaphragm Valves
It is dependent on the design, and is especially suitable for highly-pure to heavily contaminated, liquid and gaseous inert and corrosive media. Just as classical control valves, diaphragm valves also have good control properties, especially for media which is soiled or provided with particles.
The major area of use in many industries is e.g. water treatment.
The actuator can be manually operated, pneumatically operated and motorized.
Connection types include: solvent cement spigots and weld spigots, union ends and flanges. The connection types are generally available with most different standards and norms, (DIN, imperial measurements etc.)
- Nominal sizes: DN 10 - DN 100
- Operating pressure: 0 - 10 bar
- Operating temp.: -10 to 90°C
- Body material: PVC-U, ABS, PP, PVDF, PFA, Inliner
- PP-H Outliner PP reinforced
- Seal material: EPDM, FPM, PTFE
- Body configuration: Straight through body (2/2-way valve), T-valve (3/2-way valve), multi-port valves in PVC-U, PP and PVDF on request
- Operator: manual, pneumatic, motorized
Globe Valves and Control Valves
It is dependent on the design, especially suitable for clean liquid and gaseous, inert and corrosive media. Globe valves are highly suitable for control applications and can be combined with control cones and control devices for this purpose.
Ball Valves
It is dependent on the design, especially suitable for pure to slightly contaminated, liquid and gaseous inert and corrosive media. The major areas of use are industrial applications, above all for water procurement and water treatment.
Swing Check Valve, Plastic
- Nominal sizes: DN 40 - DN 300
- Max. operating pressure: 10 bar
- Body material: PVC-U, PP, PVDF
Sensor Systems and Display Units
In addition to process valves, GEMÜ provides an entire series of measurement and display units in the field of valve technology.
- Display units for sensor systems
- Flow measurement systems
- Level measurement systems
Ball Valves, Metal
- Nominal sizes: DN 8 - DN 100
- Operating temp.: -28 to 180°C
- Body material: Stainless steel
- Seal material: PTFE
- Body configuration: Straight through body (2/2-way 1 valve), T-valve body (3/2-way valve)
Ball Valves, Plastic
- Nominal sizes: DN 15 - DN 100
- Operating temp.: 0 to 120°C
- Body material: PVC-U, PP, PVDF
Position and Process Controller
GEMÜ supplies position and process controllers for process automation. The product range includes three-point controllers to control the position of motorized valves, electro-pneumatic positioners for pneumatic valves with quarter turn and linear actuators and industrial controllers for the precise regulation of temperature, pressure, flow and levels.
ACCESSORIES
A whole series of accessories and valve instrumentation rounds off the GEMÜ product range. This includes stroke limiters and optical and elelctrical position indicators for valves, positioner, assembly accessories, mounting kits for position indicators and controllers, control air adapters and Namur mounting brackets, device sockets etc.
|
|
