Drayton Tank & Accessories started in the 90's with the aim to supply quality GRP storage tanks throughout the UK, from domestic water tanks to large commercial and industrial storage tanks, having built up an exceptional reputation with our outstanding customer service and our high quality products and our impressive track record we have grown rapidly over the years to become one of the largest suppliers of storage tanks in the UK for water, chemicals, hot water and wastewater, making us the company to call for all your storage tank requirements.
Water & Chemical Storage Tanks
GRP Storage Tanks from 45 litres up to 90,000 litres in approved one piece tanks, available for storing many liquids (potable water, hot water, rainwater, chemicals, waste, grey water, sewage etc) and can be supplied with or without insulation in a variety of sizes.
All our tanks must be installed on a flat fully supporting base.
GRP One Piece Tanks
One Piece Tanks for most standard applications and for tanks situated outside with no access restrictions. Fibreglass tanks with no internal supports or joints, with a smooth internal surface, can be produced in a variety of external colours, our most economical style of tanks.
One Piece Tanks can be manufactured plain or preinsulated, they have no internal supports or joints, with a smooth bacteria resistant internal surface, with external steel supports encapsulated within the walls of the tanks where required.
One piece tanks can be manufactured using one of three different resins:
- Standard Tanks (water upto 35 C, very mild chemicals)
- F & E Tanks (water upto 70 C, milder chemicals)
- Chemical Tanks (water upto 100 C, mild chemicals)
Key Benefits
- No internal supports or joints
- Smooth Internal bacteria resistant surface
- Lids can be apexed to cope with rain/snow loads if required
- Insulated tanks available with HCFC Free Foam
- Economical costs compared to Sectional Tanks
- Manufactured to BS EN 13280: 2001
GRP Two Piece Tanks
Two Piece Tanks with no internal supports, designed for projects where access may have some restriction (eg. doorways), these tanks can be separated in two halves along their height for access through doors and corridors, can be easily erected once in position. An economical alternative to standard Sectional panel tanks.
Two Piece Tanks have been designed to provide a cost effective solution where a tank needs to go through a restricted access but also costs less than a full Sectional tank, these tanks are split along their height allowing them to be taken through doorways and down corridors and similar pathways, These tanks have a smooth internal surface and no internal supports.
Key Benefits
- No internal supports
- Smooth internal bacterial resistant surface
- Lids can be apexed to cope with rain/snow loads if required
- Insulated tanks available with HCFC Free Foam
- Cost effective solution to Sectional tanks
- Manufactured to BS EN 13280: 2001
GRP Sectional Tanks
If a tank is required within an area that the capacity of the tank is far greater than the access into the area will allow requires a Sectional Tank. They are made from GRP tank panels that can easily be moved into position and assembled into the tank by our team of specialists within the area.
Sectional Tanks are available plain and preinsulated, and are constructed from a number of GRP panels that are bolted and sealed together on site, these tanks can be completely internally flanged only needing 50mm area around the tank to assemble, also tanks that are externally flanged with either internal or external flanged base, all sectionals come complete with sectional lid and inspection hatch.
Key Benefits
- Ideal for tanks that are to be situated through a restricted access
- Insulated tanks available with HCFC Free Foam
- 1000 *1000mm Panels available as standard, specific panel sizes available on request
- Tanks upto 3m in height with no restriction on length and width
- Manufactured to BS EN 13280: 2001
Tank Linings & Epoxy Coatings
Replacing a tank is not always the best solution, the tank may only require lining for many more years of service at a fraction of the cost of replacing the tank with a new tank, epoxy coated linings and GRP linings can last for many years and are a really effective solution to prolonging the expected life of an existing system, our lining system coat the inside of the tank with the material and cures to a durable finish superior to Butyl and other rubber liners.
Key Benefits
- Cost effective alternative to replacing tank
- Reduce downtime of system
- Approved materials used for required usage
- Fittings do not require replacing
Kiosks & Housings
Drayton One Piece and Sectional Housings made to your specific size usually at the same cost as many standard housings, available in a wide variety of external colours, with many accessories, weatherproof and secure.
Kiosk and housings are available plain or with insulation, as one piece or sectional types.
Available With:
- Single or double doors
- Locklable handles
- Louvered vents
- Plywood internal back boards
- Fire retardant resin on application
- Custom made to your requirements
- Boltable down
Key Benefits
- One piece or sectional designs
- Available in a variety of external colours
- Smooth external surface
- Esthetically pleasing
- Custom made to any sizes
Rainwater Storage Tanks
Low cost GRP Rainwater Storage Tanks from 45 litres up to 20,000 litres available in light grey or British racing green as standard, supplied with bolted lid, larger sizes available on application.
Our tanks can be positioned above ground or below ground with suitable support.
Connections can be made to the tanks in any size simply by drilling the required hole in the tank with a holesaw.
All tanks must be installed on a flat fully supporting base.
Key Benefits
- Low cost rainwater storage
- Installed above/below ground
- Smooth internal bacteria resistant surface
- UV stable
- Light weight manufacture
- Available in varying colour and sizes
Accessories
Many accessories are available including ball valves, drip trays, overflows and covers.
We can supply a various range of accessories which is listed below, for more details on any of the accessories please contact us.
Range of Accessories
- Aylesbury Float Valves
- Ball Valves
- Screened Overflows Kits & Vents
- Access Hatches (Raised/Hinged/Locked)
- GRP Ball Valve Housings
- Screened Spillover Wiers
- Type AB Airgaps (CAT 5 Backflow prevention)
- GRP Split / Flat Lids
- GRP Drip Trays
- UPVC Tank Connectors
- Brass BSP Essex Connectors
- NP16 Stub Flanges
