Pressure Reducing Valves
FP 720-UL-A5 Pressure Reducing BERMAD Valve
The BERMAD Model FP 720-UL Pressure Reducing Valve is a hydraulically self operated, diaphragm actuated control valve that reduces high, unstable, upstream pressure to maintain precise, stable, downstream pressure, regardless of fluctuating demand or varying upstream pressure.
FP 420-00 Pressure Reducing BERMAD Valve
The BERMAD Model FP 420-00 Pressure Reducing Valve is a hydraulically self operated, diaphragm actuated control valve that reduces high, unstable, upstream pressure to maintain precise, stable, downstream pressure, regardless of fluctuating demand or varying upstream pressure.
Pump Control Valves
FP 430-UF and FP 730-UF Pressure Relief BERMAD Valves
The BERMAD Models FP 430-UF and FP 730-UF are pilot operated valves that prevent over pressure, maintaining a constant preset system pressure regardless of fluctuating demands. They are FM Approved and UL Listed up to 175 psi (FP 430-UF) & 350 psi (FP 730-UF) according to NFPA-20.
FP 430-59 and FP 730-59 Pressure Relief BERMAD Valve
The BERMAD Models FP 430-59 and FP 730-59 combine fire pump relief with a pre-opening feature to anticipate pump start-up surge. The valve opens fully by means of electric override upon pump start-up. It continues to function as a pressure relief valve after the electric override is shut off.
FP 436 Differential Pressure Sustaining BERMAD Valve
The Model FP 436 Differential Pressure Sustaining Valve is a hydraulically operated, diaphragm actuated, control valve that sustains minimum pre-set, differential pressure between two points such as pump suction and discharge, filter upstream and downstream, etc.
FP 730-R-UL Pump Suction Control BERMAD Valve
The BERMAD Model FP 730-R-UL is a pilot operated, line pressure driven valve that senses booster pump suction pressure and modulates to sustain it above the preset Net Positive Suction Head (NPSH) required by the pump. It is UL Listed according to NFPA standards.
Level Control Valves
FP 450-60 Level Control BERMAD Valve with Modulating Horizontal Float
The Model FP 450-60 Level Control Valve with Modulating Horizontal Float is a hydraulically controlled, diaphragm actuated, control valve that controls reservoir filling to maintain constant water level, regardless of fluctuating demand.
FP 450-65 Level Control BERMAD Valve with Bi-Level Electric Float
The Model FP 450-65 Level Control Valve with Bi-Level Electric Float is a hydraulically operated, diaphragm actuated, control valve that controls reservoir filling in response to an electric float switch signal. The valve opens at pre-set low level and shuts off at pre-set high level.
FP 450-66 Level Control BERMAD Valve with Bi-Level Vertical Float
The Model FP 450-66 Level Control Valve with Bi-Level Vertical Float is a hydraulically controlled, diaphragm actuated control valve that controls reservoir filling in response to a hydraulic on/off float pressure command. The valve opens at pre-set low level and shuts off at pre-set high level.
FP 450-80-M6 Level Control BERMAD Valve with Altitude Pilot
The Model FP 450-80 Level Control Valve is a hydraulically controlled, diaphragm actuated, control valve that shuts off at pre-set reservoir high level and fully opens in response to an approximately one-meter (three foot) level drop, as sensed by the 3-Way altitude pilot mounted on the main valve.
Petroleum Separation Valves
BERMAD Separation Valves enable the removal of water (or other liquid) that has infiltrated petroleum products and has been allowed to separate. The heavier liquid is discharged through the Separation Valve. The specific gravity differential separation sensitivity is 0.04. The primary application is for draining water.
