Bekaert Progressive Composites, Corp. is dedicated to the advancement of membrane pressure vessel technology. Founded in April 2000 by a core group of former Advanced Structures employees, we begin our endeavor with over 175 years of combined experience in design and fabrication. Our goal is to become your supplier of choice when it comes to selecting high-quality pressure vessels for your membrane filtration systems.
Mega Side Port MSP ®
Side ported MSP vessels are specifically used for large municipal systems where multiple porting was not a practical solution. The design provides over 50% more flow and can also be used to reduce pressure-drop to decrease system operation costs.
PRO-8-150-MSP
The PROTEC Model PRO-8-150-MSP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 300 PSI.
What separates this MSP model from the traditional side port is the addition of the 3`` port designed specifically for systems using multiple port technology. The PRO-8-150-MSP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fibre elements. The element interface hardware for the specified element is supplied with the vessel.
The Model PRO-8-150-MSP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
- design pressure: 150 PSI
- operating pH range: 3-11
- minimum operating temperature: 20°F
- cleaning pH range(less than 30 minutes): 2-12
- maximum operating temperature: 120°F
- factory test pressure 165 PSI
- application: typical brackish water
- burst pressure: 900 PSI
- view drawing only view packet
PRO-8-300-MSP
The PROTEC Model PRO-8-300-MSP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 300 PSI.
What separates this MSP model from the traditional side port is the addition of the 3`` port designed specifically for systems using multiple port technology. The PRO-8-300-MSP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fibre elements. The element interface hardware for the specified element is supplied with the vessel.
The Model PRO-8-300-MSP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
- design pressure 300 PSI
- operating pH range 3-11
- minimum operating temperature: 20°F
- cleaning pH range (less than 30 minutes): 2-12
- maximum operating temperature: 120°F
- factory test pressure: 330 PSI
- application: typical brackish water
- burst pressure: 1800 PSI
- view drawing only view packet
PRO-8-600-MSP
The PROTEC Model PRO-8-600-MSP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 600 PSI.
What separates this MSP model from the traditional side port is the addition of the 3`` port designed specifically for systems using multiple port technology. The PRO-8-600-MSP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fibre elements. The element interface hardware for the specified element is supplied with the vessel.
The Model PRO-8-600-MSP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
- design pressure 600 PSI
- operating pH range 3-11
- minimum operating temperature: 20°F
- cleaning pH range (less than 30 minutes): 2-12
- maximum operating temperature: 120°F
- factory test pressure: 660 PSI
- application: typical seawater
- burst pressure: 3600 PSI
- view drawing only view packet
PRO-8-1000-MSP
The PROTEC Model PRO-8-1000-MSP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 1000 PSI.
What separates this MSP model from the traditional side port is the addition of the 3`` port designed specifically for systems using multiple port technology. The PRO-8-1000-MSP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fibre elements. The element interface hardware for the specified element is supplied with the vessel.
The Model PRO-8-1000-MSP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
- design pressure: 1000 PSI
- operating pH range: 3-11
- minimum operating temp. 20°F
- cleaning pH range(less than 30 minutes): 2-12
- maximum operating temperature: 120°F
- factory test pressure: 1100 PSI
- application: typical seawater
- burst pressure: 6000 PSI
- view drawing only view packet
PRO-8-1200-MSP
The PROTEC Model PRO-8-1200-MSP is designed for continuous use as housing for membrane filtration elements to purify typical brackish waters at any positive pressure up to 1200 PSI.
What separates this MSP model from the traditional side port is the addition of the 3`` port designed specifically for systems using multiple port technology. The PRO-8-1200-MSP will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fibre elements. The element interface hardware for the specified element is supplied with the vessel.
The Model PRO-8-1200-MSP has been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped.
- design pressure: 1200 PSI
- operating pH range: 3-11
- minimum operating temperature: 20°F
- cleaning pH range (less than 30 minutes): 2-12
- maximum operating temperature: 120°F
- factory test pressure: 1320 PSI
- application: typical seawater
- burst pressure: 7200 PSI
- view drawing only view packet
