SULPHASORB XL FILTERMEDIA ACID GAS ADSORBENT
Description
Sulphasorb XL was recently developed to provide our customers with the highest extended life. While it targets the same gases as Sulphasorb, Sulphasorb XL has a capacity for Hydrogen Sulphide (H2S) which can not be surpassed by any other adsorbent. Aspatec odor carbon filtermedia starts with the highest grade activated carbon. This ensures that the greatest possible adsorption capacity is reached. The carbon is then impregnated with an acid gas neutralizing compound and two proprietary reagents which improve its neutralizing and adsorption efficiency.
Sulphasorb performs exceptionally well in scrubbers manufactured by our company.
Specifications
General description
Sulphabsorb XL are porous, cylindrical pellets of high grade bituminous activated carbon.
Properties
- H2S removal Capacity (by volume): Greater than 0.30 g/cc
- Removal Capacity (by weight): H2S: >50% ; SO2: 11% ; Cl2: 16%
- CTC value: 70% min
- Surface Area: 1050 m2/g
- Density: 580 kg/m3
- Moisture Content: 15%
- Hardness: 97 min
- Ignition Temperature: 425 C
Media Remaining Life Testing
Aspatec holland provides free quarterly media testing for life of the media installation. This testing provides critical data including remaining carbon life, remaining reagent content, total life prediction and projected replacement date. All analyses are performed at our laboratory.
ASPATEC HOLLAND 8-10 ADSORBENT MEDIA
Description
Aspatec holland 8-10 has been developed to have roughly twice the capacity of Aspatec holland 4 media. This second generation adsorbent media was developed in order to provide customers with the maximum adsorption benefit at the minimum cost. Aspatec holland 8-10 targets a broad range of gases which cause corrosion, odor, and other undesirable gases. Aspatec holland starts with the highest grade activated alumina. This ensures that the greatest possible adsorption capacity is reached. This alumina is the impregnated with potassium permanganate while being formed into a pellet. Aspatec Holland adds a proprietary additive during the process in order to keep all eight to maximum ten percent of the permanganate available for reaction.
Aspatec holland 8-10 performs exceptionally well in scrubbers manufactured by our company.
Specifications
General description
Aspatec holland 8-10 are spherical or cylindrical porous pellets formed from a combination of powdered alumina and other binders, suitably impregnated with potassium permanganate to provide optimum adsorption, absorption, and oxidation of a wide variety of gaseous contaminants.
Removal Capacity
- Hydrogen Sulfide: 0.14 g/cc min (18% by weight)
- Sulfur Dioxide: 0.06 g/cc min (3,5% by weight)
- Nitric Oxide: 0,06 g/cc min (2,5% by weight)
- Nitrogen Dioxide: 0,016 g/cc min (1% by weight)
- Formaldehyde: 0,023 g/cc min (1,4% by weight)
Manufacturing Quality Assurance Standards
- Leach test (indication of porosity)- 180 minute or less
- Permanganate content: 8 minimum 10% maximum
- Moisture Content: 20% maximum
- Crush Strength: 40 to 60%
- Abrasion Loss: 3.0% maximum
- Nominal pellet Diameter: approximately 4 mm, 85% after screening
Environmental Monitor & Technical Services
Our deep bed scrubbers are designed to remove all contaminants. Our laboratory media testing predicts media performance, and corrosion coupon testing confirms G1 environments.
Click to read about our Aspatec Holland 8-10 Adsorbent Media
