Plastic Cartridge
Series 'GPO', 'GNO' and 'GSO' Molded Plastic Filter Chambers: These are used for filtration and purification of chemicals, Di water, pharmaceuticals, electronics and photographic chemicals. These sturdy and quality built two piece filter housings are designed to meet the need for reliable, long lasting and convenient use. They provide extended service life and dependable performance. Pipeline mounted cap, and body nested Buna N “O”-ring provide ease of installation and quick- change cartridge replacement. Housings pass Water Conditioning Federation’s recommended standards for hydrostatic leak and burst pressures. For complete specifications, refer to table below. All chambers accept most standard filter cartridges: depth type, pleated area, carbon, and refillable mini-canisters.
GPO models are molded from reinforced polypropylene for water and chemical compatibility.
Metal Cartridge
Series 'M' Steel and Stainless Steel Filter Chambers: These are used for filtration and purification of water, photographic, solvents, chemicals, pharmaceutical and oils.
Plastic Bags
The Series 630 and 640 Bag Filter Chambers are designed for filtering various process solutions where clarification will extend operating life and improve quality. These chambers have been redesigned to make them easier to operate and more convenient to service. The new design features a bottom inlet and bottom outlet which allows these chambers to be hard piped and allows the user to change bags without disconnecting any hoses or piping. Additionally the new design gives a choice of cover closure; either the traditional swing bolt/tie rod with tee handles or screw top. As before the Series 630 and 640 Bag Filter Chambers feature non-metallic solution contact and are offered in a choice of materials of construction to meet a wide variety of applications. The single bag design provides filter area to 5.0 sq. ft. and micron retention Ratings of 1 to 100.
Metallic Bags
Series 'K' Metal Cartridge Bag Filter Chambers: The Series 'K' Metal Filter Chambers provide excellent value and are available in either a cartridge or bag design and with a choice of carbon steel, 304 or 316 stainless steel constructions. Cartridge chambers range in size from a single 10" cartridge to 448-10" cartridge capacity. Bag chambers are from 0.5 sq. ft. to 26.4 sq. ft. of surface area. These chambers are ideal for either recirculatory or single pass filtration in either series or parallel flow configurations. The wide range of sizes, styles and options means that due to chemical compatibility or temperature considerations require a metal filter chamber.
K Series
- Single, 3 ; 6 Round Cartridge Chambers
- Multi-round cartridge chambers
- Single bag chambers
- Multi-round bag chambers
- Twin capacity bag chamber
- OEM 100 PSI bag chamber
- Initial and replacement filter bags
Disc Filter Chambers Series 'G': These disc filter chambers are designed for quality filtration of plating and other chemical solutions. The large surface area with I.D. and O.D. edge seals on all filter discs assures optimum performance and clarity of solution being filtered. Disc filters may be used with a precoat of filter aid alone or with a mixture of filter aid and powdered carbon. Carbon discs are also available and may be installed in total or in partial to accomplish the proper degree of organic removal. Some applications may allow filtration without a media precoat. Chambers include a drip pan to catch run-off liquid when servicing discs. Disc chambers are serviced by lifting the cover and disc stack assembly from the chamber, facilitating a cleaner change-out and less solution loss than with other designs. No messy "floating" of the disc is required when changing the disc media.
Carbon Purification Chambers
- Bulk Carbon Chamber: for maximum amount of granular carbon
- Carbon Canister Chamber: for convenient refill of granular carbon and interchangeability with C528PE or C548PE powdered carbon cartridges.
Carbon purification chambers offer a simple, low-cost, but effective method of removing organic impurities from plating baths and other chemical solutions.
- Smoother, brighter deposits
- Fewer rejects
- Reduced tank downtime
Resins
Ion Exchange Resin Chambers and Systems
For Precious Metal Recovery: These resin systems can recover gold and other metals from plating operations easily and economically. Select the proper resin for gold recovery from acid or cyanide rinse water. Depth of resin column assures good solution contact for maximum metal recovery. Gold is recovered by incinerating the resin. Units have early payback; one cubic foot of resin can retain 70 to 100 troy ounces of gold.
For Heavy Metal Removal/Recovery: Recover heavy metals from metal finishing rinse water and printed circuit board manufacturing. Effluent is suitable for discharge or bath replenishment. Concentrated regenerate can be chemically treated for disposal or possible recovery.
For Water Purification: Units provide high quality deionized water when filled with a strong base mixed-bed resin. Product water is low in dissolved solids, CO2 and silica, with a resistivity of 10 mega hms or higher. Resin has built-in resistance color indicator, changing from purple to golden brown to indicate resin exhaustion.
