AUXPS480515BP-1: 30W Auxiliary Power Supply
30W auxiliary power supply with 3 DC / DC -converters with camera control unit electronic boards.
Features include:
- 2A @ +5VDC output
- 1A @ -5VDC output
- 0.5A +/-15VDC output
- Wide range 36-72VDC input, nominal 48VDC
- Lead fuse protected input
- Input voltage filtering and power on current limiting
- Reverse voltage protection at input
- Electronic self resetable fuse protection for each DC/DC -converter
- Output voltage filtering
- Short circuit protection of all outputs
- Reverse voltage protection of all outputs
- Individual status LEDs for monitoring of input and output voltages of each DC/DC -converter
- Split or common input output ground
Dimensions: 160x100 x 19mm (w/o VG –connector)
Main power input: nom.48VDC/30W (36-72VDC)
MCCCU-1: Multi Conductor Camera Control Unit
Complete multi conductor CCTV camera control unit electronics with wide range primary power supply and cooling fans all in just one ¾ 19`` rack
-
650W or 450W wide range 85-265VAC primary power supply for world wide use sufficient for intermittent operation of complete camera control unit
-
48VDC cooling fans at both sides of the rack with special side panels
-
300W stepdown regulator for HPS10048-1-DCTRL for tractor DC-motor drive with current limiting and cable compensation
-
300W stepdown regulator for HPS10048-1-DCTRL for halogen (voltage source operation with cable compensation) or LED light (current source operation)
-
300W stepdown regulator HPS10048-1-DCTRL for cable drum DC-motor drive
-
300W stepdown regulator HPS10048-1-DCTRL for cable drum DC-motor drive
-
Optional 300W stepdown regulator HPS10048-1-DCTRL as auxiliary power supply in ROV
-
Camera module and camera head DC-motor supply (pan, tilt and focus) switching regulator CAMPS1215R-DCTRL
-
Auxiliary power supply AUXPS480515BP-1 +/-5VDC and +/-15VDC for all other power supplies and video overlay board
-
Video overlay and RS-485-master controller board VTG1224BW-2
-
Remote control board RC8A14D8LED-1 for controlling all functions of camera equipment, driving crawler and cable drum forward/backward and pan, tilt and focus of camera, optional second remote control board for van installation
-
System communication over RS485-bus with 6/7 nodes and a 40ms system update rate
-
Flexible scalable flash microcontroller architecture gives plenty of room for extensions and future development and a long lifetime of the complete system
-
Windows® program for service and adjustment
-
Free Windows® sewer inspection program PIPEX+
Dimensions: 330 x 134 x 275 mm
Weight: 5.6kg
CCU4H1C1AUX-BUS: Camera Control Unit Backplane
Backplane for multi conductor camera control unit MCCCU-1
Other input/output collectors
- Two 10 pin collectors for remote control board RC8A14D8LED-1
- Onboard PS/2 connector and 10 pin connector for keyboard
- 10 pin connector for second quadrature encoder
- 2 RS232 interface 10 pin connectors
- 16 pin connector for four Y/C or composite video outputs
- 10 pin connector for two Y/C or composite video inputs
- 26 pin measurement and diagnosis connectors for all high power supplies in place on the backpanel allow easy access of all relevant inputs and outputs of the HPS10048-1DCTRL boards
- 10 pin service connector to switch compensation of all four main power supplies off
- A variety of optional signal I/O is accessible on option connectors
- Solid backplane board for complete wiring of a multi conductor camera control unit with power supply and video overlay for direct mounting into 19`` rack
- 4 HPS 10048-1-DCTRL 300W power supply slots for crawler DC-motor drive, LED or halogen light, cable drum DC-motor drive and another auxiliary high power supply
- 1 CAMPS1215R-1-DCTRL slot for camera module power and camera head pan, tilt and focus DC-motor drive
- 1 AUXPS4805515BP-1 slot for auxiliary +/-5VDC and +/-15VDC power supply
- 1 VTG1224BW-2 slot video overlay board and main system controller
- Optional external lead fuse for 110VDC main power input
- Optional lead fuse for 48VDC main power input
- Optional PE to common ground node connection
- 48VDC fan collectors at left and right side of board with common lead fuse
Main power input/output connectors
-
Main input voltages 110VDC and 48VDC from primary wide input range 85-265VAC power supply
-
Output connector for four main power consumers, crawler motor drive, light power, cable drum motor drive and auxiliary high power to cable reel (camera equipment)
Control signal input/output connector
40 pin header connector from/to cable reel (camera equipment) with Y/C and composite video input from camera, output camera voltage, 2 signal inputs from quadrature encoder for metercounter, 3 digital drum select identification inputs, 2 voltage outputs for camera head motors, one auxiliary digital input, two switched control line outputs for general purpose and the common ground node potential on 14 pins
Dimensions: 300 x 128 x 3 mm (w/o connectors)
Main power input:
110VDC, 3A max
48VDC auxiliary
RC8A14D8LED-1: Remote Control Controller Board
Multi purpose flash microcontroller input control panel controller board with RS485-interface.
Features include:
- Flexible scalable flash memory microcontroller system for field programming
- Single +5VDC power supply
- 8 analog inputs, 10bit resolution with operational amplifier input for signal adaption and impedance conversion, 14 digital input lines, monitoring LEDs for power supply voltage RS485 interface on board
- Windows® emulation program for standard firmware and Windows® measurement program for board test
- All kinds of control input devices like normal potentiometers, analog joysticks with potentiometers can be used
- Digital inputs with pullup resistors and RC-filtering and overvoltage protection
- 8 LED output lines with series resistor, RC-filtering and overvoltage protection
- Standard firmware available to control a set of 3 HPS-10048-1-DCTRL in combination with a video overlay board VTG1224BW-2
Dimensions: 120 x 55 x 4 mm (w/o connectors)
Connections:
- 26 pin standard IO-connector
- 20 pin extension IO-connector
- 8 pin main connector
- 10 pin flash microcontroller programming interface
